To place an order, scroll down and enter quantities in the multi-add grid and click "add selected to cart". For product details, select any SKU or size and click the Description and Specifications tabs. Scroll to the bottom for related items.
Metric Hex Tap Bolts, Stainless Steel A4 (316), M16-2.00 x 35M
Diameter - Thread Pitch: M16-2.00
| Quantity | Unit price |
|---|---|
| 1 – 99 |
$2.75*
|
| 100 – 999 |
$2.51*
|
| 1000+ |
$2.28*
|
- Across Flats (Width): 24mm (Max 36.00mm - Min 35.00mm)
- Color: Silver
- Corrosion Resistant: Yes
- Diameter: M16
- Drive Style: External Hex
- Head Type: Hex Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Fit: 6g
- FT = Full Thread: Yes
- Grade: A4
- Head Height Basic: Max 10.18mm - Min 9.82mm
- Head Style: Hex
- Length: 35mm
- Material: Stainless Steel
- Part Number: 1021-220016
- Product Type: Metric Hex Head Tap Bolts
- System of Measurement: Metric
- Tensile PSI: 100,000 - 125,000
- Thread Direction: Right Hand
- Thread Pitch: 2.00 mm
- Thread Size: M16
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Wrench Size: 24mm
- Yield PSI: 55,000 - 75,000
|
This M16 x 2.0mm hex tap bolt is manufactured from A4 (316) stainless steel, providing superior corrosion resistance in marine, coastal, chemical processing, and other demanding environments where standard 18-8 stainless falls short. The partial thread design leaves an unthreaded shank section below the hex head, reducing stress concentration at the bolt-to-joint interface and providing improved shear strength compared to fully threaded alternatives. A4 stainless contains molybdenum for enhanced resistance to pitting and crevice corrosion from chlorides and saltwater, making these tap bolts ideal for structural marine assemblies, offshore platform hardware, food processing lines, and heavy-duty applications where both strength and long-term corrosion performance are essential.
A Hex Bolt is measured as: Diameter - Thread Pitch x Length from Under Head