Solid Copper Roofing Nails for Long-Life Installs
Copper roofing nails fasten shingles, flashing, and accessories with a durable, attractive metal that resists corrosion and weathers to a classic patina. They’re a common choice for cedar and slate roofs, as well as projects that pair with copper flashing and gutters.
Corrosion Resistance Copper helps withstand moisture and weather exposure on roofs.
Large Flat Head Broad bearing surface helps hold shingles, sheet, and flashing in place.
Substrate Friendly Often selected for cedar and slate to help reduce staining and galvanic issues.
Smooth or Ring Shank Choose smooth for general fastening; ring shank where added pull-out resistance is desired.
Clean Appearance Matches copper trim and develops a uniform patina over time.
Cut-to-Need Select lengths to suit shingle thickness, underlayment, and deck penetration.
How to Select Copper Roofing Nails
Match length, shank, and head size to your roofing material and deck.
Choose length for your stack: roofing material(s) + underlayment + required penetration into the deck. Follow local codes and manufacturer instructions.
Pick shank type: smooth for standard installs; ring shank for higher holding power in wind-prone areas.
Select head size large enough to spread load without cutting into the material.
Match to materials: pair copper nails with copper flashing/gutter systems to help minimize galvanic reactions.
Verify substrate (plywood/OSB/solid board) and adjust length to achieve proper embedment.
Common Applications
Cedar shingles and shakes
Slate roofing and ridge/hip caps
Copper flashing, valley, and drip-edge attachment
Gutter straps, downspout brackets, and sheet projects
Installation Tips
Drive nails straight and set heads flush—do not overdrive or cut fibers.
Pre-drill brittle materials (e.g., slate) to reduce cracking.
Avoid mixing dissimilar metals where water can bridge between them.
Follow the roofing manufacturer’s nailing pattern and local building requirements.
Related Roofing Hardware
Copper flashing, valleys, and drip edge
Copper cap/washered nails and ring-shank variants
Roofing underlayments and sealants
Tin snips, slate hammers, and nail sets
Need help choosing length or shank style? Request a quick quote and our team can assist.