Metal to Wood Roofing Screws

ProZ stitch roofing screw head color chart showing unpainted, black, white, ivory, slate, charcoal, bronze, forest green, green, crimson red, red, burgundy, and brown painted heads

What are Metal to Wood Roofing Screws? Metal to wood roofing screws are roofing fasteners used to attach metal panels, siding panels, trim, flashing, and other roofing components into wood purlins, wood framing, decking, or other wood substrates. They are commonly used in metal roofing and siding applications where the fastener needs to secure metal to wood while providing the correct point style, thread design, washer option, coating, and finished appearance for the job.

Metal to Wood

Fastgrip™

Metal-to-wood roofing screws with coarse threads and a sealing washer for fastening panels to wood substrate.

Fastgrip MINI-DRILLER™, Mechanical galvanized steel

Metal-to-wood roofing screws with a mini drill point that pierces the panel before threading into wood.

Logrip™, Galvanized Steel

Long metal-to-wood roofing screws built to reach through thick material into heavy wood framing.

ProCap™, Stainless steel

Capped metal-to-wood roofing screws with a color-matched or protective head cap and sealing washer.

ProCap MINI-DRILLER™, Stainless steel

Capped metal-to-wood roofing screws with a mini drill point for piercing the panel before threading into wood.

Phillips wafer head, Zinc plated steel

Metal-to-wood roofing screws with a wide, thin wafer head and Phillips drive that sit low against the panel.

ReGrip™

Metal-to-wood roofing screws designed for re-fastening or replacing screws in existing wood substrate.

TruGrip™

Metal-to-wood roofing screws with threads engineered for consistent grip and pull-out resistance in wood.

TuffGrip™, Mechanical galvanized steel

Heavy-duty metal-to-wood roofing screws built for high pull-out strength in demanding applications.

Metal to Wood Roofing Screws By Color

Browse every metal-to-wood screw line by head color, to match your panels, trim, and flashing.

Why Choose Metal to Wood Roofing Screws?

Metal to wood roofing screws are designed for applications where metal roofing or siding components need to be fastened into wood. They are commonly used with metal panels, trim, flashing, closures, siding panels, and other exposed-fastener roofing components installed over wood purlins, wood framing, decking, or similar wood substrates.

This category includes metal-to-wood roofing screw options such as Fastgrip™, Fastgrip MINI-DRILLER™, Logrip™, ProCap™, ProCap MINI-DRILLER™, Phillips wafer head, ReGrip™, TruGrip™, TuffGrip™, and color-matched metal to wood roofing screws. These options help match the fastener to the substrate, panel type, washer requirement, color, coating, and installation style.

Common Uses for Metal to Wood Roofing Screws

Metal to wood roofing screws are commonly used for fastening metal roofing panels, siding panels, trim, flashing, ridge caps, closures, and other sheet metal roofing components into wood framing or wood purlins.

They are often used on pole barns, garages, sheds, agricultural buildings, residential metal roofing projects, commercial metal siding, and repair work where metal panels are being secured to wood. Color-matched options are useful when the screw head will remain visible on the finished roof or wall surface.

Fastgrip, ProCap, TuffGrip, TruGrip, and ReGrip Options

Fastgrip™ roofing screws are commonly used for metal-to-wood roofing applications where a dependable roofing screw is needed for fastening panels into wood. Fastgrip MINI-DRILLER™ screws provide a related option for applications where the screw needs to work through metal before anchoring into wood.

ProCap™ and ProCap MINI-DRILLER™ roofing screws provide stainless steel roofing screw options for metal-to-wood applications. TuffGrip™ and TruGrip™ roofing screws offer additional options for metal panel fastening, while ReGrip™ screws are useful for repair-style applications where a larger or replacement fastener may be needed.

Metal to Wood vs Metal to Metal Roofing Screws

Metal to wood roofing screws are used when the fastener needs to secure metal roofing or siding components into wood. Metal to metal roofing screws are used when fastening metal roofing components to steel or another compatible metal substrate.

Choosing the correct screw type matters because the point style, thread design, washer, and holding performance need to match the material being fastened into. If the screw is being installed into wood purlins, wood framing, decking, or another wood substrate, use a metal-to-wood roofing screw style.

Color-Matched vs Unpainted Metal to Wood Roofing Screws

Color-matched metal to wood roofing screws are a good choice when the screw head will remain visible against painted metal roofing panels, siding panels, trim, or flashing. Matching the fastener color to the panel helps create a cleaner finished appearance on exposed-fastener roofing systems.

Unpainted metal to wood roofing screws are often used for utility fastening, hidden or less-visible locations, repairs, unpainted panels, or applications where color matching is not required. Choose the finish based on whether the screw head will be visible after installation.

Sealing Washers and Exposed Roofing Applications

Many metal to wood roofing screws are used with bonded sealing washers for exposed roofing and siding applications. The washer helps seal around the fastener head when the screw is installed through metal panels, trim, or flashing.

Proper washer installation matters. The washer should be compressed enough to seal without being overdriven, crushed, or distorted. Overdriving can damage the washer, while underdriving may leave the seal too loose.

How to Choose the Right Metal to Wood Roofing Screw

Choose the screw based on the material being fastened, wood substrate, panel thickness, washer style, screw length, diameter, coating, material, color, and installation conditions. For exposed metal roofing and siding, confirm whether the screw needs a bonded sealing washer and whether the head color should match the panel.

After confirming the application, select the screw series that fits the job. Standard metal-to-wood panel fastening, color-matched exposed roofing, stainless steel options, replacement fastening, and specialty washer needs may each call for a different roofing screw style.

Related Roofing Screw Categories

Browse related roofing screw categories to compare metal-to-wood options, metal-to-metal screws, color-matched fasteners, washer styles, materials, coatings, and specialty roofing screw types.

Metal to Wood Roofing Screw FAQs

What are metal to wood roofing screws?

Metal to wood roofing screws are roofing fasteners used to attach metal roofing panels, siding panels, trim, flashing, and other metal components into wood purlins, framing, decking, or other wood substrates.

When should I use metal to wood roofing screws?

Use metal to wood roofing screws when fastening metal panels or roofing components into wood. If the fastener is being installed into steel or another metal substrate, use a metal-to-metal roofing screw instead.

What is the difference between metal to wood and metal to metal roofing screws?

Metal to wood roofing screws fasten metal components into wood substrates. Metal to metal roofing screws fasten metal components to compatible metal surfaces. The point style, threads, washer style, and holding performance need to match the substrate.

Do metal to wood roofing screws need a sealing washer?

Many exposed metal roofing and siding applications use roofing screws with bonded sealing washers. The right washer choice depends on the panel, exposure level, fastener style, and installation requirements.

What are color-matched metal to wood roofing screws used for?

Color-matched metal to wood roofing screws are used when the screw head will remain visible on painted metal roofing panels, siding panels, trim, or flashing. They help the fastener blend into the finished installation.

Can metal to wood roofing screws be used for repairs?

Yes, if the screw style, length, diameter, washer, and substrate match the repair. Replacement or repair-style roofing screws may be used when an existing fastener hole needs a different screw option.

How do I choose the right metal to wood roofing screw?

Choose the screw based on the wood substrate, panel thickness, screw length, washer style, coating, material, head color, and exposure level. For visible roofing and siding applications, confirm both the fastening performance and the finished appearance before ordering.