Machine Screws, Phillips Flat Head, Zinc Plated Steel, 1/4"-20 x 3"
Diameter - Thread Pitch: 1/4"-20
| Quantity | Unit price |
|---|---|
| To 99 |
$0.40*
|
| To 999 |
$0.21*
|
| From 1000 |
$0.18*
|
- Color: Silver
- Condition: New
- Corrosion Resistant: Yes
- Countersink: 82 Degree
- Diameter: 1/4"
- Drive Style: Phillips
- Head Type: Flat Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Finish: Zinc Plated
- Fit: 2A
- Head Height Max: 0.153
- Head Diameter: Max 0.507 - Min 0.452
- Head Style: Flat
- Length: 3"
- Material: Steel
- Overall Head Height: Max 0.153 - Min 0.131
- Part Number: 720572197952
- Phillips Drive: #3
- Product Type: Machine Screws
- Size Type: Regular
- System of Measurement: Inch
- Thread Diameter: (1/4") Max 0.2489 - Min 0.2408
- Thread Direction: Right Hand
- Thread Pitch: 20 Per Inch
- Thread Size: 1/4"-20
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
- Zinc plated steel is common in the fastener industry
- Zinc adds a layer of corrosion resistance to steel
- A machine screw is commonly identified by its small size
- Zinc has a light and shiny color
- May have a bright blue hue
- Not recommended for exterior or harsh environmental use
1/4"-20 Phillips flat head machine screws are available in a plain alloy steel with zinc plating.
REACH and RoHS Compliant
Product number:
8300-020-0002
Skip product gallery
Lock Washers, Split Ring, Zinc Plated Steel, 1/4"(.252 ID x .487 OD x .062 THK)
From
$0.01*
Subscription
Frequently Used With
Size:
1/4"
