Sheet Metal Screws, Phillips Pan Head, Stainless Steel 18-8, #8 x 5/16"
Diameter - Thread Pitch: #8-15
| Quantity | Unit price |
|---|---|
| To 99 |
$0.08*
|
| To 999 |
$0.06*
|
| From 1000 |
$0.05*
|
- Color (Duplicate): Silver
- Color: Silver
- Condition: New
- Corrosion Resistant: Yes
- Diameter: #8
- Drive Style: Phillips
- Elongation: 30%
- Head Type: Pan Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Grade: 18-8
- Hardness: 100 Rockwell B
- Head Height Max: 0.096
- Head Diameter: Max 0.322 - Min 0.306
- Head Style: Pan
- Length: 5/16"
- Material (Duplicate): 18-8 Stainless Steel
- Material: Stainless Steel
- Overall Head Height: Max 0.096 - Min 0.085
- Part Number: 3661124152142
- Phillips Drive: #2
- Point Type: A
- Product Type: Sheet Metal Screws
- Reduction: 0.4
- Size Type: Regular
- Standards Met: ANSI B18.6.4
- System of Measurement: Inch
- Tensile PSI: 100,000 - 125,000 PSI
- Thread Diameter Major: (#8) 0.168" - 0.162"
- Thread Diameter Minor: (#8) 0.123" - 0.116"
- Thread Direction: Right Hand
- Thread Pitch: 15 Per Inch
- Thread Size: #8
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 0.0026 lb
- Yield PSI: 55,000 - 75,000 PSI
- #8-15
- Cut into sheet metal, plastic or wood
- Fully threaded
- Great for attaching metal to wood
- Strong retention in wood
- Also known as Self Piercing Screws or Self Tapping Screws
- Pan head - rounded top with an undercut (flat bottom) head
- Sizes listed below as: Diameter - Thread Pitch
- A 18-8 stainless steel Phillips pan head sheet metal screw is corrosion and rust resistant
- Ideal for fresh water and exterior weather exposure
Product number:
3240005
Skip product gallery
Lock Washers, Split Ring, Stainless Steel 304, #8 (.167 ID x .293 OD x .040 Thick)
From
$0.02*
Subscription
Flat Washers, Stainless Steel 304, #8 (.174 ID x .375 OD x .031 Thick)
From
$0.02*
Subscription
Frequently Used With
Size:
#8
Size:
#12
