#14-10 Phillips Oval Head Sheet Metal Screws 18-8 Stainless Steel

#14-10 Stainless Steel Phillips Oval Head Sheet Metal Screws

Diameter - Thread Pitch: #14-10


  • #14-10
  • Raised decorative head
  • Notched at the tip to aid in chip removal
  • Threads cut into material for a stronger hold
  • 18-8 Stainless steel Phillips oval head sheet metal screws are rust resistant
  • 18-8 stainless steel is the industry standard
  • Sizes listed below as: Diameter - Thread Pitch

Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size/SKU
Select Package Quantity Price
SubTotal
#14-10 x 1/2"
#14-10 x 1/2"
1 $0.27 (0.27/ea)
100 $18.00 (0.18/ea)
1000 $150.00 (0.15/ea)
Subtotal: $0.00 /
#14-10 x 5/8"
#14-10 x 5/8"
1 $0.61 (0.61/ea)
100 $18.00 (0.18/ea)
1000 $150.00 (0.15/ea)
Subtotal: $0.00 /
#14-10 x 3/4"
#14-10 x 3/4"
1 $0.23 (0.23/ea)
100 $13.00 (0.13/ea)
1000 $110.00 (0.11/ea)
Subtotal: $0.00 /
#14-10 x 1"
#14-10 x 1"
1 $0.24 (0.24/ea)
100 $15.00 (0.15/ea)
1000 $130.00 (0.13/ea)
Subtotal: $0.00 /
#14-10 x 1-1/4"
#14-10 x 1-1/4"
1 $0.26 (0.26/ea)
100 $17.00 (0.17/ea)
1000 $150.00 (0.15/ea)
Subtotal: $0.00 /
#14-10 x 1-1/2"
#14-10 x 1-1/2"
1 $0.30 (0.3/ea)
100 $20.00 (0.2/ea)
1000 $170.00 (0.17/ea)
Subtotal: $0.00 /
#14-10 x 1-3/4"
#14-10 x 1-3/4"
1 $0.41 (0.41/ea)
100 $26.00 (0.26/ea)
1000 $220.00 (0.22/ea)
Subtotal: $0.00 /
#14-10 x 2"
#14-10 x 2"
1 $0.38 (0.38/ea)
100 $25.00 (0.25/ea)
1000 $210.00 (0.21/ea)
Subtotal: $0.00 /
#14-10 x 2-1/2"
#14-10 x 2-1/2"
1 $0.46 (0.46/ea)
100 $31.00 (0.31/ea)
1000 $270.00 (0.27/ea)
Subtotal: $0.00 /
#14-10 x 3"
#14-10 x 3"
1 $0.53 (0.53/ea)
100 $37.00 (0.37/ea)
1000 $320.00 (0.32/ea)
Subtotal: $0.00 /
#14-10 x 3-1/2"
#14-10 x 3-1/2"
1 $0.68 (0.68/ea)
100 $56.00 (0.56/ea)
1000 $510.00 (0.51/ea)
Subtotal: $0.00 /
#14-10 x 4"
#14-10 x 4"
1 $1.07 (1.07/ea)
100 $73.00 (0.73/ea)
1000 $630.00 (0.63/ea)
Subtotal: $0.00 /

Frequently Used With

1 $1.04 (1.04/ea)
10 $8.10 (0.81/ea)
50 $38.00 (0.76/ea)
Subtotal: $0.00
1 $1.08 (1.08/ea)
10 $10.20 (1.02/ea)
50 $49.00 (0.98/ea)
Subtotal: $0.00
1 $0.13 (0.13/ea)
100 $9.00 (0.09/ea)
1000 $80.00 (0.08/ea)
Subtotal: $0.00
1 $0.08 (0.08/ea)
100 $4.00 (0.04/ea)
1000 $30.00 (0.03/ea)
Subtotal: $0.00
1 $0.09 (0.09/ea)
100 $3.00 (0.03/ea)
1000 $20.00 (0.02/ea)
Subtotal: $0.00

Product Specifications
ANSI
ANSI B18.6.3
Color
Silver
Corrosion Resistant
Yes
Diameter
#14
Drive Style
Phillips
Elongation
30%
Grade
18-8
Hardness
100 Rockwell B
Head Diameter
Max 0.507 - Min 0.452
Head Height Max
0.232
Head Style
Oval
Material
Stainless Steel
Overall Head Height
Max 0.232 - Min 0.197
Phillips Drive
#3
Point Type
A
Product Type
Sheet Metal Screws
Reduction
40%
Standards Met
ANSI B18.6.3
System of Measurement (Unit)
Inch
Tensile PSI
100,000 - 125,000 PSI
Thread Diameter Major
(#14) 0.254 - 0.248
Thread Diameter Minor
(#14) 0.185 - 0.178
Thread Direction
Right Hand
Thread Pitch (Count)
10 Per Inch
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
Yield PSI
55,000 - 75,000 PSI