Sheet Metal Screws, Phillips Oval Head, Stainless Steel 18-8, #12 x 1/2"
Diameter - Thread Pitch: #12-11
| Quantity | Unit price |
|---|---|
| To 99 |
$0.16*
|
| To 999 |
$0.12*
|
| From 1000 |
$0.11*
|
- ANSI: ANSI B18.6.3
- Color: Silver
- Condition: New
- Corrosion Resistant: Yes
- Diameter: #12
- Drive Style: Phillips
- Elongation: 30%
- Head Type: Oval Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Grade: 18-8
- Hardness: 100 Rockwell B
- Head Height Max: 0.2
- Head Diameter: Max 0.438 - Min 0.389
- Head Style: Oval
- Length: 1/2"
- Material: Stainless Steel
- Overall Head Height: Max 0.200 - Min 0.155
- Part Number: 717029127143
- Phillips Drive: #3
- Point Type: A
- Product Type: Sheet Metal Screws
- Reduction: 0.4
- Size Type: Regular
- Standards Met: ANSI B18.6.3
- System of Measurement: Inch
- Tensile PSI: 100,000 - 125,000 PSI
- Thread Diameter Major: (#12) 0.221 - 0.215
- Thread Diameter Minor: (#12) 0.162 - 0.155
- Thread Direction: Right Hand
- Thread Pitch: 11 Per Inch
- Thread Size: #12
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
- Yield PSI: 55,000 - 75,000 PSI
- #12-11
- Raised decorative head
- Notched at the tip to aid in chip removal
- Threads cut into material for a stronger hold
- 18-8 Stainless steel Phillips oval head sheet metal screws are rust resistant
- 18-8 stainless steel is the industry standard
- Sizes listed below as: Diameter - Thread Pitch
Product number:
3440002