Machine Screws, Phillips Oval Head, Stainless Steel 18-8, 1/4"-20 x 1/2"
Diameter - Thread Pitch: 1/4"-20
| Quantity | Unit price |
|---|---|
| To 99 |
$0.22*
|
| To 999 |
$0.15*
|
| From 1000 |
$0.13*
|
- ANSI: ANSI B1.1
- Class: 2A
- Color: Silver
- Condition: New
- Corrosion Resistant: Yes
- Countersink: 82 Degree
- Diameter: 1/4"
- Drive Style: Phillips
- Elongation: 30%
- Head Type: Oval Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Fit: 2A
- Grade: 18-8
- Head Height Max: 0.232
- Head Diameter: Max 0.507 - Min 0.452
- Head Style: Oval
- Length: 1/2"
- Material: Stainless Steel
- Overall Head Height: Max 0.232 - Min 0.178
- Part Number: 717029148544
- Phillips Drive: #3
- Product Type: Machine Screws
- Size Type: Regular
- Standards Met: ANSI B18.6.3
- System of Measurement: Inch
- Thread Direction: Right Hand
- Thread Pitch: 20 Per Inch
- Thread Size: 1/4"-20
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
- Countersunk head with a raised domed top
- Used either with a nut or in a pre-tapped hole
- A machine screw is commonly identified by its small size
- Raised decorative head
- Used to secure materials that may be tampered with
- Ideal for freshwater moisture environments
- Rust and corrosion resistant
1/4"-20 Phillips drive oval head machine screws are available in grade 18-8 stainless steel.
Product number:
10400002
Skip product gallery
Hex Finish Nuts, Stainless Steel 304, 1/4"-20 (7/16" Flats x 7/32" Thick)
From
$0.05*
Subscription
Lock Washers, Split Ring, Stainless Steel 304, 1/4" (.252 ID x .487 OD x .062 Thick)
From
$0.03*
Subscription
Nylon Lock Nuts, Stainless Steel 304, 1/4-20 (.439 Flats x .328 Height)
From
$0.09*
Subscription
Frequently Used With
Size:
1/4"-20
Size:
1/4"
Size:
1/4"-20