Metric Socket Set Screws, Dog Point, Hex 1.5MM Drive, Stainless Steel A2 (18-8), M3 x 0.7 x 4MM
Screw Diameter x Thread Pitch: M3-0.50
| Quantity | Unit price |
|---|---|
| 1 – 99 |
$0.11*
|
| 100 – 999 |
$0.10*
|
| 1000+ |
$0.09*
|
- Additional Sizing Info: Full Thread
- Color: Silver
- Condition: New
- Corrosion Resistant: Yes
- Cup Point Diameter: Max 1.545 - Min 1.520
- Diameter: M3
- Drive Style: Internal Hex (Allen)
- Head Type: No Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Fit: 3A
- Grade: A2
- Head Style: No Head
- Hex Drive: 1.5mm
- Length: 4MM
- Material: Stainless Steel
- Point Degree: 118
- Point Type: Dog
- Product Type: Socket Set Screws
- System of Measurement: Metric
- Thread Direction: Right Hand
- Thread Pitch: 0.50 mm
- Thread Size: M3 x .5
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
|
Metric Dog Point Socket Set Screws in A2 (18-8) Stainless Steel feature a full-diameter cylindrical tip designed to extend into a mating hole, slot, or keyway in the shaft or component being secured. Unlike cup or cone point set screws that grip through surface deformation, dog point set screws provide positive mechanical engagement, the cylindrical point physically interlocks with the mating feature, preventing rotation and axial movement even under heavy loads or repeated cycling. This makes dog point set screws ideal for precise alignment applications, permanent shaft positioning, and assemblies where the set screw must locate into a pre-drilled hole or machined slot. The internal hex (Allen) socket drive allows flush installation below the surface and enables high torque application without cam-out. Manufactured from A2 (18-8) stainless steel, the most widely used stainless grade for fasteners, these set screws offer excellent corrosion resistance for food processing, marine, outdoor, chemical exposure, and washdown environments. The M3 x 0.5mm coarse thread pitch is a standard metric size commonly used in small machinery, electronics enclosures, precision instruments, and miniature assemblies requiring exact positioning.
Sizes Listed As:
Diameter - Thread Pitch x Length from Underside of Head
FT = Full Thread
PT = Partial Thread