To place an order, scroll down and enter quantities in the multi-add grid and click "add selected to cart". For product details, select any SKU or size and click the Description and Specifications tabs. Scroll to the bottom for related items.
Metric Hex Tap Bolt, Class 10.9, Zinc Plated Steel, M10 x 1.0 x 60M
Diameter - Thread Pitch: M10-1.0
| Quantity | Unit price |
|---|---|
| 1 – 99 |
$1.02*
|
| 100 – 999 |
$0.89*
|
| 1000+ |
$0.81*
|
- Across Flats (Width): 17mm (Max 17.00mm - Min 16.73mm)
- Additional Sizing Info: FT = Full Thread, PT = Partial Thread
- Color: Silver
- Diameter: M10
- Drive Style: External Hex
- Head Type: Hex Head
- Thread Direction: Right Hand
- Thread Type: Fine
- Finish: Zinc Plated
- Fit: 6g
- Grade: 10.9 (Grade 8 Metric Equivalent)
- Head Height: Max 6.58 - Min 6.22
- Head Height Basic: 6.4 mm
- Head Style: Hex
- Length: 60mm
- Material: Steel
- Product Type: Metric Hex Cap Screw
- System of Measurement: Metric
- Thread Direction: Right Hand
- Thread Pitch: 1.0 mm
- Thread Size: M10 x 1.0
- Thread Standard: UNF
- Thread Type: Fine
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Wrench Size: 17mm
|
This M10 x 1.0mm fine thread hex tap bolt is manufactured from Class 10.9 high-strength steel with a zinc plated finish for reliable corrosion protection. The 1.0mm pitch is finer than both the standard M10 coarse (1.5mm) and standard fine (1.25mm) threads, delivering maximum thread engagement area, the tightest resistance to vibrational loosening, and the most precise tensioning control available in this diameter. The partial thread shank carries shear loads through solid bolt body rather than across threads, extending fatigue life in cyclically loaded joints. With approximately 1,040 MPa tensile strength, these Class 10.9 fine pitch tap bolts are specified for high-precision applications including hydraulic manifolds, instrumentation mounts, and critical automotive and motorsport assemblies where fine adjustment and vibration resistance are paramount.
A Hex Bolt is measured as: Diameter - Thread Pitch x Length from Under Head
FT = Full Thread
PT = Partial Thread