To place an order, scroll down and enter quantities in the multi-add grid and click "add selected to cart". For product details, select any SKU or size and click the Description and Specifications tabs. Scroll to the bottom for related items.
Metric Hex Cap Screws, Class 8.8, Zinc Plated Steel, M10-1.50 x 120M FT
Diameter - Thread Pitch: M10-1.50
| Quantity | Unit price |
|---|---|
| 1 – 99 |
$1.22*
|
| 100 – 999 |
$1.07*
|
| 1000+ |
$0.97*
|
- Across Flats (Width): 17mm (Max 17.00mm - Min 16.73mm)
- Additional Sizing Info: FT = Full Thread, PT = Partial Thread
- Color: Silver
- Diameter: M10
- Drive Style: External Hex
- Head Type: Hex Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Finish: Zinc Plated
- Fit: 6g
- FT = Full Thread: Yes
- Grade: 10.9 (Grade 8 Metric Equivalent)
- Head Height: Max 6.58 - Min 6.22
- Head Height Basic: 6.4 mm
- Head Style: Hex
- Length: 120mm
- Material: Steel
- Part Number: 1078-010
- Product Type: Metric Hex Cap Screw
- System of Measurement: Metric
- Thread Direction: Right Hand
- Thread Pitch: 1.50 mm
- Thread Size: M10 x 1.5
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Wrench Size: 17mm
|
Manufactured from Class 8.8 steel, this M10 x 1.5mm hex cap screw is the standard metric fastener for general-purpose structural and mechanical connections. Class 8.8 delivers approximately 800 MPa tensile strength and serves as the metric equivalent to SAE Grade 5, making it the default choice for automotive, industrial, construction, and equipment assembly where reliable clamping force is required without the added cost of higher-strength grades. The hex head allows installation with standard wrenches and sockets for fast, repeatable tightening. A zinc plated finish provides RoHS compliant corrosion protection for indoor and sheltered outdoor environments, extending service life and maintaining a clean, professional appearance.
A Hex Bolt is measured as: Diameter - Thread Pitch x Length from Under Head
FT = Full Thread
PT = Partial Thread