Print this page

Metric Hex Cap Screws, Class 8.8, Zinc Plated Steel, M10-1.0 x 70M PT

Diameter - Thread Pitch: M10-1.0

Hex head for standard wrench or socket installation
Class 8.8 medium-strength steel – approximately 800 MPa tensile strength
Known as a hex cap screw, hex bolt, or hex head bolt
Zinc plated finish – RoHS compliant corrosion protection
M10 x 1.0mm fine thread pitch – multiple lengths available

This M10 x 1.0mm fine thread hex cap screw is manufactured from Class 8.8 steel with a zinc plated finish for reliable corrosion protection. The 1.0mm pitch is finer than both the standard M10 coarse (1.5mm) and standard fine (1.25mm) threads, delivering maximum thread engagement area, the tightest resistance to vibrational loosening, and the most precise tensioning control available in this diameter. Class 8.8 delivers approximately 800 MPa tensile strength, making it the standard metric grade for general-purpose structural and mechanical bolting. Available in both partial and full thread configurations, these extra-fine pitch hex cap screws are specified for high-precision applications including hydraulic manifolds, instrumentation mounts, and critical automotive and motorsport assemblies where fine adjustment and vibration resistance are paramount.

A Hex Bolt is measured as: Diameter - Thread Pitch x Length from Under Head
FT = Full Thread
PT = Partial Thread

Product number: MHBZP88SF1070

Print this page

FT = Full Thread (threaded the entire length) · PT = Partial Thread (unthreaded shoulder below the head)

Specifications

Across Flats (Width): 17mm (Max 17.00mm - Min 16.73mm)
Additional Sizing Info: FT = Full Thread, PT = Partial Thread
Color: Silver
Diameter: M10
Drive Style: External Hex
Head Type: Hex Head
Thread Direction: Right Hand
Thread Type: Coarse
Finish: Zinc Plated
Fit: 6g
FT = Full Thread: No
Grade: 8.8
Head Height: Max 6.58 - Min 6.22
Head Height Basic: 6.4 mm
Head Style: Hex
Length: 70mm
Material: Steel
Part Number: 1078-010
Product Type: Metric Hex Cap Screw
System of Measurement: Metric
Thread Direction: Right Hand
Thread Pitch: 1.0 mm
Thread Size: M10 x 1.5
Thread Standard: UNF
Thread Type: Fine
Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
Wrench Size: 17mm

Select Size/SKU & Quantity

7 Available Sizes

SIZE/SKU	Review Volume Pricing*	Enter Any Qty
M10-1.0 x 100M PT MHBZP88SF10100	1 $2.22 ($2.22/ea) 100 $203.00 ($2.03/ea) 1000 $1,850.00 ($1.85/ea)	Quantity for Metric Hex Cap Screws, Class 8.8, Zinc Plated Steel, M10-1.0 x 100M PT $0.00
M10-1.0 x 40M FT MHBZP88SF1040	1 $0.98 ($0.98/ea) 100 $86.00 ($0.86/ea) 1000 $750.00 ($0.75/ea)	Quantity for Metric Hex Cap Screws, Class 8.8, Zinc Plated Steel, M10-1.0 x 40M FT $0.00
M10-1.0 x 45M FT MHBZP88SF1045	1 $1.31 ($1.31/ea) 100 $120.00 ($1.20/ea) 1000 $1,100.00 ($1.10/ea)	Quantity for Metric Hex Cap Screws, Class 8.8, Zinc Plated Steel, M10-1.0 x 45M FT $0.00
M10-1.0 x 50M FT MHBZP88SF1050	1 $1.09 ($1.09/ea) 100 $96.00 ($0.96/ea) 1000 $870.00 ($0.87/ea)	Quantity for Metric Hex Cap Screws, Class 8.8, Zinc Plated Steel, M10-1.0 x 50M FT $0.00
M10-1.0 x 60M PT MHBZP88SF1060	1 $1.30 ($1.30/ea) 100 $115.00 ($1.15/ea) 1000 $1,050.00 ($1.05/ea)	Quantity for Metric Hex Cap Screws, Class 8.8, Zinc Plated Steel, M10-1.0 x 60M PT $0.00
M10-1.0 x 70M PT MHBZP88SF1070	1 $1.99 ($1.99/ea) 100 $182.00 ($1.82/ea) 1000 $1,660.00 ($1.66/ea)	Quantity for Metric Hex Cap Screws, Class 8.8, Zinc Plated Steel, M10-1.0 x 70M PT $0.00
M10-1.0 x 80M PT MHBZP88SF1080	1 $1.57 ($1.57/ea) 100 $139.00 ($1.39/ea) 1000 $1,270.00 ($1.27/ea)	Quantity for Metric Hex Cap Screws, Class 8.8, Zinc Plated Steel, M10-1.0 x 80M PT $0.00