1/2" Headed Concrete Weld Studs Steel

1/2" Headed Concrete Anchor Welding Studs

Headed Weld Studs in Plain Steel with a 1/2" Diameter


Headed Concrete Studs, also called Anchors, are used for anchoring steel plates and other shapes into concrete. Each Stud comes with a Ferrule ceramic cap to reduce spatter and give the weld a finished look.

Weld Studs are installed using a drawn arc stud welding gun to create a permanent, high strength bond with an incredibly fast installation time while still being a strong, one-sided weld.

Welding Studs in this selection are unthreaded and each stud comes with a matching ferrule for installations on flat surfaces. All 1/2" Weld Studs in this selection have a Head Diameter of approx. 1" and Head Thickness of approx. 5/16" and are made of plain steel.

Weld Studs are Commonly Used In:

  • Buildings
  • Bridges
  • Power Distribution Equipment
  • Food Service
  • Vehicles
  • Ship Building
  • Military Applications
  • Embed Plates

Weld studs are listed as Diameter x Length (Including Head)

PLEASE NOTE: Lengths listed are BEFORE the weld. 1/2" Diameter Studs will be approx. 1/8" shorter after welding.

Additional Ferrule Cap Styles such as Inside angle, Outside angle, and Vertical are available upon request. Please call our office at 866-573-0445 for more details.


You May Also Like:

Welding Safety Equipment
Welding Equipment
Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size/SKU
Select Package Quantity Price
SubTotal
1/2" x 2-1/8"
1/2" x 2-1/8"
1 $1.85 (1.85/ea)
100 $174.00 (1.74/ea)
1000 $1,700.00 (1.7/ea)
Subtotal: $0.00 /
1/2" x 2-5/8"
1/2" x 2-5/8"
1 $2.00 (2/ea)
100 $185.00 (1.85/ea)
1000 $1,840.00 (1.84/ea)
Subtotal: $0.00 /
1/2" x 3-1/8"
1/2" x 3-1/8"
1 $2.09 (2.09/ea)
100 $196.00 (1.96/ea)
1000 $1,940.00 (1.94/ea)
Subtotal: $0.00 /
1/2" x 4-1/8"
1/2" x 4-1/8"
1 $2.10 (2.1/ea)
100 $197.00 (1.97/ea)
1000 $1,950.00 (1.95/ea)
Subtotal: $0.00 /
1/2" x 5-5/16"
1/2" x 5-5/16"
1 $2.25 (2.25/ea)
100 $206.00 (2.06/ea)
1000 $1,870.00 (1.87/ea)
Subtotal: $0.00 /
1/2" x 6-1/8"
1/2" x 6-1/8"
1 $2.94 (2.94/ea)
100 $282.00 (2.82/ea)
1000 $2,790.00 (2.79/ea)
Subtotal: $0.00 /
1/2" x 8-1/8"
1/2" x 8-1/8"
1 $4.26 (4.26/ea)
100 $413.00 (4.13/ea)
1000 $4,110.00 (4.11/ea)
Subtotal: $0.00 /

Product Specifications
ASTM
A29/A108, 1010-1020
Color
Silver
Elongation
20% (in 2 inches)
Finish
Plain
Head Diameter
~1"
Head Height
~5/16"
Material
Low Carbon Steel
Product Type
Headed Weld Studs
System of Measurement (Unit)
Inch
Tensile PSI
65,000 PSI min
Thread Direction
Right Hand
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
Yield PSI
51,000 PSI min.