1/2" x 1-1/8" Headed Concrete Weld Studs, Steel
Headed Weld Studs in Plain Steel with a 1/2" Diameter
Headed Concrete Studs, also called Anchors, are used for anchoring steel plates and other shapes into concrete.
Weld Studs are installed using a drawn arc stud welding gun to create a permanent, high strength bond with an incredibly fast installation time while still being a strong, one-sided weld.
Welding Studs in this selection are unthreaded. All 1/2" Weld Studs in this selection have a Head Diameter of approx. 1" and Head Thickness of approx. 5/16" and are made of plain steel.
Weld Studs are Commonly Used In:
- Buildings
- Bridges
- Power Distribution Equipment
- Food Service
- Vehicles
- Ship Building
- Military Applications
- Embed Plates
Weld studs are listed as Diameter x Length (Including Head)
PLEASE NOTE: Lengths listed are BEFORE the weld. 1/2" Diameter Studs will be approx. 1/8" shorter after welding. We recommend purchasing ferrule ceramic caps to reduce spatter and give the weld a finished look. Ferrule ceramic caps are not included.
Additional Ferrule Cap Styles such as Inside angle, Outside angle, and Vertical are available upon request. Please call our office at 866-573-0445 for more details.
You May Also Like:
| Welding Safety Equipment |
|