Fender Washers, Hot Dipped Galvanized Steel, 5/16 x 1-1/4" (.343 ID x 1-1/4 OD x .050 Thick)
Hot Dipped Galvanized Steel Large OD Fender Washers
| Quantity | Unit price |
|---|---|
| To 99 |
$0.18*
|
| To 999 |
$0.13*
|
| From 1000 |
$0.10*
|
- asme: ASME B18.21.1
- Color (Duplicate): Silver
- Color: Silver
- Condition: New
- Corrosion Resistant: Yes
- Diameter: 5/16" (11/32" ID (Min 0.338", Max 0.358")
- Finish: Hot Dipped Galvanized
- Material (Duplicate): Steel
- Material: Steel
- Outside Diameter (OD): 1-1/4"
- Part Number: 3661124192520
- Pattern: Fender Washer
- Product Type: Fender Washer
- Size: 5/16 x 1-1/4"
- Size System: US
- Size Type: Regular
- System of Measurement: Inch
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Prevent pull-through
- Allow for distribution of weight over greater area than with normal washers
- Can be used where rust has made a hole larger
- Used on materials that are softer such as sheet metal
- Hot dip galvanized fender washers to be used with HDG hardware
- Actual measurements may vary slightly +/- depending on production run
Fender Washer Specifications
| Flat Washer Sizes | Inner Diameter (ID) | Outer Diameter (OD) | Washer Thickness |
| #10 x 1" | 0.203" | 1" | 0.040" |
| #10 x 1-1/4" | 0.203" | 1-1/4" | 0.040" |
| 1/4" x 11/16" | 0.281" | 11/16" | 0.050" |
| 1/4" x 1" | 0.281" | 1" | 0.050" |
| 1/4" x 1-1/4" | 0.281" | 1-1/4" | 0.050" |
| 1/4" x 1-1/2" | 0.281" | 1-1/2" | 0.050" |
| 1/4" x 2" | 0.281" | 2" | 0.062" |
| 5/16" x 1" | 0.343" | 1" | 0.050" |
| 5/16" x 1-1/4" | 0.343" | 1-1/4" | 0.050" |
| 5/16" x 1-1/2" | 0.343" | 1-1/2" | 0.062" |
| 5/16" x 2" | 0.343" | 2" | 0.062" |
| 3/8" x 1" | 0.406" | 1" | 0.050" |
| 3/8" x 1-1/4" | 0.406" | 1-1/4" | 0.050" |
| 3/8" x 1-1/2" | 0.406" | 1-1/2" | 0.050" |
| 3/8" x 2" | 0.406" | 2" | 0.062" |
| 1/2" x 1-1/2" | 0.531" | 1-1/2" | 0.062" |
| 1/2" x 1-3/8" | 0.531" | 1-3/8" | 0.062" |
| 1/2" x 2" | 0.531" | 2" | 0.062" |
Product number:
FWHDG3516114