Print this page

Sheet Metal Screws, Phillips Flat Head, Self Driller TEK 3, Zinc Plated Steel, #14 x 1"

Diameter - Thread Pitch: 1/4"-14

1/4"-14
CR+3 Zinc to easily drill into materials
Countersunk head that runs flush with the installation surface
#3 Self drilling (TEK) point
Zinc plated phillips flat head self drilling screws are hardened to make drilling easy
NOTE: Sheet metal screws provide excellent retention in wood but can be difficult to remove

Product number: 1070-106-0012

Print this page

Specifications

ANSI: B18.6.4
Color: Silver
Corrosion Resistant: Yes
Diameter: #14
Drive Style: Phillips
Head Type: Flat Head
Thread Direction: Right Hand
Thread Type: Coarse
Finish: Zinc Plated
Hardness: 40 Rockwell C
Head Height Max: 0.153
Head Diameter: Max 0.507 - Min 0.452
Head Style: Flat
Length: 1"
Material: Stainless Steel
Phillips Drive: #3
Point Type: TEK
Product Type: Sheet Metal Screws
System of Measurement: Inch
TEK Self Drilling Point: TEK 3
Thread Direction: Right Hand
Thread Pitch: 14 Per Inch
Thread Size: #14
Thread Standard: UNC
Thread Type: Coarse
Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
Yield PSI: 150,000 PSI

Select Size/SKU & Quantity

8 Available Sizes

SIZE/SKU	Review Volume Pricing*	Enter Any Qty
1/4"-14 x 3/4" 1070-106-0002	1 $0.15 ($0.15/ea) 100 $11.00 ($0.11/ea) 1000 $90.00 ($0.09/ea)	Quantity for Sheet Metal Screws, Phillips Flat Head, Self Driller TEK 3, Zinc Plated Steel, #14 x 3/4" $0.00
1/4"-14 x 1" 1070-106-0012	1 $0.18 ($0.18/ea) 100 $13.00 ($0.13/ea) 1000 $110.00 ($0.11/ea)	Quantity for Sheet Metal Screws, Phillips Flat Head, Self Driller TEK 3, Zinc Plated Steel, #14 x 1" $0.00
1/4"-14 x 1-1/4" 1070-106-0022	1 $0.20 ($0.20/ea) 100 $15.00 ($0.15/ea) 1000 $130.00 ($0.13/ea)	Quantity for Sheet Metal Screws, Phillips Flat Head, Self Driller TEK 3, Zinc Plated Steel, #14 x 1-1/4" $0.00
1/4"-14 x 1-1/2" 1070-106-0032	1 $0.22 ($0.22/ea) 100 $17.00 ($0.17/ea) 1000 $150.00 ($0.15/ea)	Quantity for Sheet Metal Screws, Phillips Flat Head, Self Driller TEK 3, Zinc Plated Steel, #14 x 1-1/2" $0.00
1/4"-14 x 2" 1070-106-0042	1 $0.28 ($0.28/ea) 100 $22.00 ($0.22/ea) 1000 $190.00 ($0.19/ea)	Quantity for Sheet Metal Screws, Phillips Flat Head, Self Driller TEK 3, Zinc Plated Steel, #14 x 2" $0.00
1/4"-14 x 2-1/2" 1070-106-0052	1 $0.30 ($0.30/ea) 100 $25.00 ($0.25/ea) 1000 $230.00 ($0.23/ea)	Quantity for Sheet Metal Screws, Phillips Flat Head, Self Driller TEK 3, Zinc Plated Steel, #14 x 2-1/2" $0.00
1/4"-14 x 3" 1070-106-0062	1 $0.44 ($0.44/ea) 100 $30.00 ($0.30/ea) 1000 $280.00 ($0.28/ea)	Quantity for Sheet Metal Screws, Phillips Flat Head, Self Driller TEK 3, Zinc Plated Steel, #14 x 3" $0.00
1/4"-14 x 3-1/2" 1070-106-0072	1 $0.50 ($0.50/ea) 100 $36.00 ($0.36/ea) 1000 $350.00 ($0.35/ea)	Quantity for Sheet Metal Screws, Phillips Flat Head, Self Driller TEK 3, Zinc Plated Steel, #14 x 3-1/2" $0.00

Phillips Power Bits, #3, Length 2"

Volume Pricing*

$1.04

($1.04/ea)

$8.10

($0.81/ea)

$38.00

($0.76/ea)

$0.00

*Volume pricing available on select products. Products without quantity breaks are priced per unit.

Page Total: $0.00

Sheet Metal Screws, Phillips Flat Head, Self Driller TEK 3, Zinc Plated Steel, #14 x 1"

Diameter - Thread Pitch: 1/4"-14

Specifications

Frequently Used With