Wing Nuts, Zinc Plated Steel, 5/8"-11
Manually Installed Nuts in CR+3 Zinc Plated Grade 2 Steel
- Made for projects that don't require tools
- Install with just your fingers
- Two protuding "wings"
- Can be referred to as either a Wingnut or Wing Nut
- Commonly used where frequent adjustments is required
- CR+3 Zinc Plated Steel
- Sized listed below as: Internal Diameter - Thread Pitch
| Nut Sizes | Wing Span | Thickness |
| #6 | Max 0.72" - Min 0.59" | Max 0.11" - Min 0.07" |
| #8 | Max 0.91" - Min 0.78" | Max 0.14" - Min 0.10" |
| #10 | Max 0.91" - Min 0.78" | Max 0.14" - Min 0.10" |
| 1/4" | Max 1.10" - Min 0.97" | Max 0.18" - Min 0.14" |
| 5/16" | Max 1.25" - Min 1.12" | Max 0.21" - Min 0.17" |
| 3/8" | Max 1.44" - Min 1.31" | Max 0.24" - Min 0.20" |
| 7/16" | Max 1.94" - Min 1.81" | Max 0.33" - Min 0.26" |
| 1/2" | Max 1.94" - Min 1.81" | Max 0.33" - Min 0.26" |
| 5/8" | 2.770" REF | 0.352" REF |
Product number:
1102-088-0092