Stainless Steel Concrete Drop In Anchors

Stainless Steel Concrete Drop In Anchors

Drop-In Female Anchors for Concrete and Stone Applications


  • Used in flush-mount applications in solid base materials
  • Installed crimped side down in a pre-drilled hole
  • Require a setting tool for proper installation
  • 304 Stainless steel is corrosion resistant and durable
  • Resists oxidizing and rust
  • However, it can tarnish over time

A Drop In anchor is a female (internal) threaded concrete anchor, often installed overhead that runs flush with the surface of concrete or stone.

Thread Diameter - Thread Pitch x Length of Anchor


Thread Diameter: Drop-In Anchor Length: Drill (Hole) Size: Internal Threaded Length:
1/4" 1" 3/8" 1/2"
3/8" 1-9/16" 1/2" 13/16"
1/2" 2" 5/8" 1-1/4"
5/8" 2-1/2" 7/8" 2"
3/4" 3-1/8" 1" 2"

Frequently Purchased With:


Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size
Select Package Quantity
SubTotal
Drop-In Anchors 304 Stainless Steel - 1/4"-20 x 1"
SKU #1040-004-0002
Drop-In Anchors 304 Stainless Steel - 1/4"-20 x 1"
SKU #1040-004-0002
1
$1.89 (1.89/ea)
25
$44.00 (1.76/ea)
100
$162.00 (1.62/ea)
1000
$1,480.00 (1.48/ea)
Subtotal: $0.00 /
Drop-In Anchors 304 Stainless Steel - 3/8"-16 x 1-9/16"
SKU #1040-004-0012
Drop-In Anchors 304 Stainless Steel - 3/8"-16 x 1-9/16"
SKU #1040-004-0012
1
$3.46 (3.46/ea)
25
$80.50 (3.22/ea)
100
$298.00 (2.98/ea)
1000
$2,730.00 (2.73/ea)
Subtotal: $0.00 /
Drop-In Anchors 304 Stainless Steel - 1/2"-13 x 2"
SKU #1040-004-0022
Drop-In Anchors 304 Stainless Steel - 1/2"-13 x 2"
SKU #1040-004-0022
1
$5.64 (5.64/ea)
25
$131.25 (5.25/ea)
100
$486.00 (4.86/ea)
1000
$4,460.00 (4.46/ea)
Subtotal: $0.00 /
Drop-In Anchors 304 Stainless Steel - 5/8"-11 x 2-1/2"
SKU #1040-004-0032
Drop-In Anchors 304 Stainless Steel - 5/8"-11 x 2-1/2"
SKU #1040-004-0032
1
$10.77 (10.77/ea)
25
$255.50 (10.22/ea)
100
$971.00 (9.71/ea)
1000
$9,690.00 (9.69/ea)
Subtotal: $0.00 /
Drop-In Anchors 304 Stainless Steel - 3/4"-10 x 3-1/8"
SKU #1040-004-0042
Drop-In Anchors 304 Stainless Steel - 3/4"-10 x 3-1/8"
SKU #1040-004-0042
1
$14.63 (14.63/ea)
25
$347.25 (13.89/ea)
100
$1,320.00 (13.2/ea)
1000
$13,170.00 (13.17/ea)
Subtotal: $0.00 /

Product Specifications
Corrosion Resistant
Yes
Grade
304
Material
Stainless Steel
System of Measurement (Unit)
Inch
Thread Direction
Right Hand
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances