Lock Washers, Split Ring, Hot Dipped Galvanized, 3/4" (OD 1.264", ID 0.765")
Medium Profile Split Ring Lock Washers
- Used to prevent fasteners from loosening unintentionally
- Split and bent to create a spring-like effect
- Add extra pressure to fastener assembly resulting in higher resistance to rotation
- Hot dipped galvanized steel for superior corrosion resistance
- Only use Hot dipped galvanized with other HDG fasteners
- Actual measurements may vary slightly +/- depending on production run
- Due to the finishing process for Hot Dip Galvanized fasteners, it is recommended to only use Hot Dip Galvanized fasteners with Hot Dip Galvanized fasteners and not mix metals. This can create threading and durability issues.
Hot Dipped Galvanized Lock Washer Specifications
| Sizes | Outer Diameter (OD) | Inner Diameter (ID) |
| 1/4" | 0.487" | 0.260" |
| 5/16" | 0.583" | 0.322" |
| 3/8" | 0.680" | 0.385" |
| 1/2" | 0.869" | 0.512" |
| 5/8" | 1.072" | 0.640" |
| 3/4" | 1.264" | 0.765" |
| 7/8" | 1.455" | 0.890" |
| 1" | 1.647" | 1.015" |
| 1-1/8" | 1.847" | 1.153" |
| 1-1/4" | 2.036" | 1.280" |
| 1-1/2" | 2.419" | 1.504" |
Product number:
1070-004-0052