Print this page

Sheet Metal Screws, Phillips Pan Head, Self Driller TEK 3, Stainless Steel 410, #8 x 3/8"

Diameter - Thread Pitch: #8-18

#8-18
Self drilling point (TEK)
Pierce 20 to 14 gauge metals
Fully threaded
Threads cut into material
Great for attaching metal equipment to wood
Sizes listed below as: Diameter x Length
410 Stainless steel is harder than most materials easing the installation process

Product number: 3470002

Print this page

Specifications

ANSI: ANSI B18.6.4
Color (Duplicate): Silver
Color: Silver
Condition: New
Corrosion Resistant: Yes
Diameter: #8
Drive Style: Phillips
Driver Max RPM: 2300
Elongation: 30%
Head Type: Pan Head
Thread Direction: Right Hand
Thread Type: Coarse
Grade: 410
Hardness: 40 Rockwell C
Head Height Max: 0.096
Head Diameter: Max 0.322 - Min 0.306
Head Style: Pan
Length: 3/8"
Material (Duplicate): 410 Stainless Steel
Material: Stainless Steel
Overall Head Height: Max 0.096 - Min 0.085
Part Number: 717029139597
Phillips Drive: #2
Point Type: TEK
Product Type: Self Drilling Screws
Size Type: Regular
Standards Met: ANSI B18.6.4
System of Measurement: Inch
TEK Self Drilling Point: TEK 3
Tensile PSI: 180,000 PSI Heat Treated
Thread Diameter Major: (#8) 0.166"
Thread Diameter Minor: (#8) 0.122"
Thread Direction: Right Hand
Thread Pitch: 18 Per Inch
Thread Size: #8
Thread Standard: UNC
Thread Type: Coarse
Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
Weight: 1 lb

Select Size/SKU & Quantity

8 Available Sizes

SIZE/SKU	Review Volume Pricing*	Enter Any Qty
#8-18 x 3/8" 3470002	1 $0.12 ($0.12/ea) 100 $8.00 ($0.08/ea) 1000 $70.00 ($0.07/ea)	Quantity for Sheet Metal Screws, Phillips Pan Head, Self Driller TEK 3, Stainless Steel 410, #8 x 3/8" $0.00
#8-18 x 1/2" 3470012	1 $0.16 ($0.16/ea) 100 $8.00 ($0.08/ea) 1000 $70.00 ($0.07/ea)	Quantity for Sheet Metal Screws, Phillips Pan Head, Self Driller TEK 3, Stainless Steel 410, #8 x 1/2" $0.00
#8-18 x 5/8" 3470022	1 $0.18 ($0.18/ea) 100 $10.00 ($0.10/ea) 1000 $90.00 ($0.09/ea)	Quantity for Sheet Metal Screws, Phillips Pan Head, Self Driller TEK 3, Stainless Steel 410, #8 x 5/8" $0.00
#8-18 x 3/4" 3470032	1 $0.19 ($0.19/ea) 100 $11.00 ($0.11/ea) 1000 $90.00 ($0.09/ea)	Quantity for Sheet Metal Screws, Phillips Pan Head, Self Driller TEK 3, Stainless Steel 410, #8 x 3/4" $0.00
#8-18 x 1" 3470042	1 $0.22 ($0.22/ea) 100 $13.00 ($0.13/ea) 1000 $110.00 ($0.11/ea)	Quantity for Sheet Metal Screws, Phillips Pan Head, Self Driller TEK 3, Stainless Steel 410, #8 x 1" $0.00
#8-18 x 1-1/4" 3470052	1 $0.23 ($0.23/ea) 100 $14.00 ($0.14/ea) 1000 $120.00 ($0.12/ea)	Quantity for Sheet Metal Screws, Phillips Pan Head, Self Driller TEK 3, Stainless Steel 410, #8 x 1-1/4" $0.00
#8-18 x 1-1/2" 3470062	1 $0.30 ($0.30/ea) 100 $19.00 ($0.19/ea) 1000 $160.00 ($0.16/ea)	Quantity for Sheet Metal Screws, Phillips Pan Head, Self Driller TEK 3, Stainless Steel 410, #8 x 1-1/2" $0.00
#8-18 x 2" 3470082	1 $0.42 ($0.42/ea) 100 $28.00 ($0.28/ea) 1000 $240.00 ($0.24/ea)	Quantity for Sheet Metal Screws, Phillips Pan Head, Self Driller TEK 3, Stainless Steel 410, #8 x 2" $0.00

Phillips Power Bits, #2, Length 2"

Volume Pricing*

$1.04

($1.04/ea)

$8.10

($0.81/ea)

$38.00

($0.76/ea)

$0.00

ACR Phillips Power Bits, #2 x 2"

Volume Pricing*

$1.06

($1.06/ea)

$10.00

($1.00/ea)

$48.00

($0.96/ea)

$0.00

Neoprene EPDM Washers, Stainless Steel 18-8, #8 (OD .375)

Volume Pricing*

$0.11

($0.11/ea)

100

$6.00

($0.06/ea)

1000

$50.00

($0.05/ea)

$0.00

*Volume pricing available on select products. Products without quantity breaks are priced per unit.

Page Total: $0.00

Sheet Metal Screws, Phillips Pan Head, Self Driller TEK 3, Stainless Steel 410, #8 x 3/8"

Diameter - Thread Pitch: #8-18

Specifications

Frequently Used With