Metric Flange Bolts, DIN 6921, Class 10.9 Zinc Plated Steel, M16-2.00 x 35M
Zinc Plated Class 10.9 Steel Hex Head Flange Bolts
| Quantity | Unit price |
|---|---|
| To 99 |
$3.22*
|
| To 999 |
$2.29*
|
| From 1000 |
$2.28*
|
- Across Flats (Width): 21mm
- Color: Silver
- Diameter: M16
- Drive Style: External Hex
- Head Type: Hex Flange Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Finish: Zinc Plated
- Fit: 6g
- Flange Diameter: Max 35.00mm
- Grade: Class 10.9
- Head Height Max: 14.40mm
- Head Size: 21mm
- Head Style: Hex Flange
- Length: 35
- Material: Steel
- Product Type: Metric Flange Bolts
- Standards Met: DIN 6921
- System of Measurement: Metric
- Thread Diameter: M16 (16mm)
- Thread Direction: Right Hand
- Thread Pitch: 2.00 mm
- Thread Size: M16
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- M16-2.00 (DIN 6921 sizing standards)
- Hex bolt with flange designed to be driven by a wrench or socket
- Also referred to as metric flange tap bolts
- Flange head to prevent pull-through and distribute pressure across a wider surface area
- Class 10.9 Steel
- Zinc Plated finish for durability
- Built in integral washer to distribute pressure over a greater surface area and prevent pull-through
A hex flange bolt is a fully threaded hex bolt with an integral washer designed to prevent pull through of the bolt. Flange bolts in this selection are made of Class 10.9 (the Metric Grade 8 equivalent), and are zinc plated for corrosion resistance and durability.
A Hex Bolt is measured as: Diameter - Thread Pitch x Length from Under Head
Product number:
1022-232-002