Print this page

Carriage Bolts, Hot Dipped Galvanized, Grade A307, 5/8"-11 x 3-1/2", Full Thread

Diameter - Thread Pitch: 5/8-11

Square section grips into the part being fixed (typically wood)
Prevents the bolt from turning when the nut is tightened
Carriage Bolts under 6 inches are fully threaded
Sizes over 6 inches in length have a shoulder
Coarse Thread
Due to the finishing process for Hot Dip Galvanized fasteners, it is recommended to only use Hot Dip Galvanized fasteners with Hot Dip Galvanized fasteners and not mix metals. This can create threading and durability issues.

5/8"-11 Hot dipped galvanized carriage bolts have a domed or countersunk head, and the shank is topped by a short square section under the head.

Hot Dipped Galvanized assemblies should be used exclusively. If you use a HDG bolt you must also use a HDG nut.

Product number: 1070-064-0042

Print this page

FT = Full Thread (threaded the entire length) · PT = Partial Thread (unthreaded shoulder below the head)

Specifications

Color: Gray
Condition: New
Corner Radius on Square: 0.078"
Corrosion Resistant: Yes
Diameter: 5/8"
Head Type: Dome Head
Thread Direction: Right Hand
Thread Type: Coarse
Filet Radius: 0.062"
Finish: Hot Dip Galvanized
Fit: 2A
FT = Full Thread: Yes
Grade: A307
Head Height Max: 0.344
Head Diameter: Max 1.344 - Min 1.219
Head Style: Dome
Length: 3-1/2"
Material: Steel
Other: All Carriage Bolts under 6 inches are fully threaded. Sizes over 6 inches in length have a shoulder.
Overall Head Height: Max 0.344 - Min 0.313
Part Number: 722703702639
Product Type: Carriage Bolt
Size Type: Regular
Square Neck Depth: Max 0.344 - Min 0.313
Square Neck Width: Max 0.642 - Min 0.616
System of Measurement: Inch
Thread Direction: Right Hand
Thread Pitch: 11 Per Inch
Thread Size: 5/8"-11
Thread Standard: UNC
Thread Type: Coarse
Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
Weight: 1 lb

Flat Washers, USS, Hot Dipped Galvanized, 5/8" (ID 11/16", OD 1-3/4")

Volume Pricing*

$0.41

($0.41/ea)

100

$34.00

($0.34/ea)

1000

$350.00

($0.35/ea)

$0.00

Hex Finish Nuts, Hot Dipped Galvanized, 5/8"-11 UNC

Volume Pricing*

$0.50

($0.50/ea)

100

$36.00

($0.36/ea)

1000

$320.00

($0.32/ea)

$0.00

MRO Solution 2400, Marine Grade Anti-Seize Lubricant, 8 oz.

Volume Pricing*

$20.03 ea.

$0.00

Lock Washers, Split Ring, Hot Dipped Galvanized, 5/8" (OD 1.072", ID 0.640")

Volume Pricing*

$0.40

($0.40/ea)

100

$26.00

($0.26/ea)

1000

$250.00

($0.25/ea)

$0.00

Dock Washers, Round, Hot Dipped Galvanized, 5/8" (OD 2-1/2", THK 1/4)

Volume Pricing*

$2.13

($2.13/ea)

100

$208.00

($2.08/ea)

1000

$2,020.00

($2.02/ea)

$0.00

Select Size/SKU & Quantity

22 Available Sizes

SIZE/SKU	Review Volume Pricing*	Enter Any Qty
5/8"-11 x 1-1/2" FT 1070-064-0002	1 $1.39 ($1.39/ea) 100 $121.00 ($1.21/ea) 1000 $1,090.00 ($1.09/ea)	Quantity for Carriage Bolts, Hot Dipped Galvanized, Grade A307, 5/8"-11 x 1-1/2", Full Thread $0.00
5/8"-11 x 2" FT 1070-064-0012	1 $1.60 ($1.60/ea) 100 $138.00 ($1.38/ea) 1000 $1,250.00 ($1.25/ea)	Quantity for Carriage Bolts, Hot Dipped Galvanized, Grade A307, 5/8"-11 x 2", Full Thread $0.00
5/8"-11 x 2-1/2" FT 1070-064-0022	1 $1.84 ($1.84/ea) 100 $159.00 ($1.59/ea) 1000 $1,450.00 ($1.45/ea)	Quantity for Carriage Bolts, Hot Dipped Galvanized, Grade A307, 5/8"-11 x 2-1/2", Full Thread $0.00
5/8"-11 x 3" FT 1070-064-0032	1 $2.07 ($2.07/ea) 100 $172.00 ($1.72/ea) 1000 $1,580.00 ($1.58/ea)	Quantity for Carriage Bolts, Hot Dipped Galvanized, Grade A307, 5/8"-11 x 3", Full Thread $0.00
5/8"-11 x 3-1/2" FT 1070-064-0042	1 $2.28 ($2.28/ea) 100 $197.00 ($1.97/ea) 1000 $1,810.00 ($1.81/ea)	Quantity for Carriage Bolts, Hot Dipped Galvanized, Grade A307, 5/8"-11 x 3-1/2", Full Thread $0.00
5/8"-11 x 4" FT 1070-064-0052	1 $2.40 ($2.40/ea) 100 $206.00 ($2.06/ea) 1000 $1,890.00 ($1.89/ea)	Quantity for Carriage Bolts, Hot Dipped Galvanized, Grade A307, 5/8"-11 x 4", Full Thread $0.00
5/8"-11 x 4-1/2" FT 1070-064-0062	1 $2.75 ($2.75/ea) 100 $236.00 ($2.36/ea) 1000 $2,170.00 ($2.17/ea)	Quantity for Carriage Bolts, Hot Dipped Galvanized, Grade A307, 5/8"-11 x 4-1/2", Full Thread $0.00
5/8"-11 x 5" FT 1070-064-0072	1 $2.97 ($2.97/ea) 100 $236.00 ($2.36/ea) 1000 $2,170.00 ($2.17/ea)	Quantity for Carriage Bolts, Hot Dipped Galvanized, Grade A307, 5/8"-11 x 5", Full Thread $0.00
5/8"-11 x 5-1/2" FT 1070-064-0082	1 $3.09 ($3.09/ea) 100 $267.00 ($2.67/ea) 1000 $2,450.00 ($2.45/ea)	Quantity for Carriage Bolts, Hot Dipped Galvanized, Grade A307, 5/8"-11 x 5-1/2", Full Thread $0.00
5/8"-11 x 6" FT 1070-064-0092	1 $3.56 ($3.56/ea) 100 $239.00 ($2.39/ea) 1000 $2,190.00 ($2.19/ea)	Quantity for Carriage Bolts, Hot Dipped Galvanized, Grade A307, 5/8"-11 x 6", Full Thread $0.00
5/8"-11 x 7" PT 1070-064-0112	1 $4.01 ($4.01/ea) 100 $333.00 ($3.33/ea) 1000 $3,050.00 ($3.05/ea)	Quantity for Carriage Bolts, Hot Dipped Galvanized, Grade A307, 5/8"-11 x 7", Full Thread $0.00
5/8"-11 x 7-1/2" PT 1070-064-0122	1 $4.50 ($4.50/ea) 100 $329.00 ($3.29/ea) 1000 $3,010.00 ($3.01/ea)	Quantity for Carriage Bolts, Hot Dipped Galvanized, Grade A307, 5/8"-11 x 7-1/2", Full Thread $0.00
5/8"-11 x 8" PT 1070-064-0132	1 $4.45 ($4.45/ea) 100 $257.00 ($2.57/ea) 1000 $2,550.00 ($2.55/ea)	Quantity for Carriage Bolts, Hot Dipped Galvanized, Grade A307, 5/8"-11 x 8", Full Thread $0.00
5/8"-11 x 9" PT 1070-064-0142	1 $4.99 ($4.99/ea) 100 $475.00 ($4.75/ea) 1000 $4,500.00 ($4.50/ea)	Quantity for Carriage Bolts, Hot Dipped Galvanized, Grade A307, 5/8"-11 x 9", Full Thread $0.00
5/8"-11 x 11" PT 1070-064-0162	1 $6.23 ($6.23/ea) 100 $601.00 ($6.01/ea) 1000 $5,850.00 ($5.85/ea)	Quantity for Carriage Bolts, Hot Dipped Galvanized, Grade A307, 5/8"-11 x 11", Partial Thread $0.00
5/8"-11 x 12" PT 1070-064-0172	1 $7.33 ($7.33/ea) 100 $574.00 ($5.74/ea) 1000 $5,260.00 ($5.26/ea)	Quantity for Carriage Bolts, Hot Dipped Galvanized, Grade A307, 5/8"-11 x 12", Partial Thread $0.00
5/8"-11 x 13" PT 1070-064-0182	1 $7.45 ($7.45/ea) 100 $667.00 ($6.67/ea) 1000 $6,120.00 ($6.12/ea)	Quantity for Carriage Bolts, Hot Dipped Galvanized, Grade A307, 5/8"-11 x 13", Partial Thread $0.00
5/8"-11 x 14" PT 1070-064-0192	1 $7.66 ($7.66/ea) 100 $745.00 ($7.45/ea) 1000 $7,200.00 ($7.20/ea)	Quantity for Carriage Bolts, Hot Dipped Galvanized, Grade A307, 5/8"-11 x 14", Partial Thread $0.00
5/8"-11 x 15" PT 1070-064-0202	1 $7.95 ($7.95/ea) 100 $625.00 ($6.25/ea) 1000 $6,210.00 ($6.21/ea)	Quantity for Carriage Bolts, Hot Dipped Galvanized, Grade A307, 5/8"-11 x 15", Partial Thread $0.00
5/8"-11 x 16" PT 1070-064-0212	1 $8.83 ($8.83/ea) 100 $645.00 ($6.45/ea) 1000 $5,380.00 ($5.38/ea)	Quantity for Carriage Bolts, Hot Dipped Galvanized, Grade A307, 5/8"-11 x 16", Partial Thread $0.00
5/8"-11 x 18" PT 1070-064-0222	1 $10.57 ($10.57/ea) 100 $940.00 ($9.40/ea) 1000 $8,640.00 ($8.64/ea)	Quantity for Carriage Bolts, Hot Dipped Galvanized, Grade A307, 5/8"-11 x 18", Partial Thread $0.00
5/8"-11 x 20" PT 1070-064-0232	1 $12.25 ($12.25/ea) 100 $860.00 ($8.60/ea) 1000 $7,900.00 ($7.90/ea)	Quantity for Carriage Bolts, Hot Dipped Galvanized, Grade A307, 5/8"-11 x 20", Partial Thread $0.00

*Volume pricing available on select products. Products without quantity breaks are priced per unit.

Page Total: $0.00

Carriage Bolts, Hot Dipped Galvanized, Grade A307, 5/8"-11 x 3-1/2", Full Thread

Diameter - Thread Pitch: 5/8-11

Specifications

Frequently Used With