Solid Brass Phillips Flat Head Wood Screws
Diameter - Thread Pitch: #4-22
Phillips Flat Head Wood Screws are designed to adjoin two pieces of wood tightly and efficiently. Wood Screws are partially threaded with a shoulder below the screw's head designed to slide through the top pieces of wood so that it can pull both boards together tightly. Phillips Flat Head Wood Screws feature a countersunk and undercut head to run flush with the installation surface.
Brass Wood Screws are an alloy made of copper and zinc. The color of brass can vary from dark to light based on the zinc content; more zinc content produces lighter brass. Brass is prized for its corrosion resistance, however it is quite soft so it is not suitable for all applications. Brass conducts electricity and is also a good conductor of heat.
Please note that color and sheen may vary for brass and silicon bronze fasteners.
|
Product Specifications:
|
|
Phillips Flat Head Wood Screw
|
|
Major Thread Diameter: (#4) Max 0.116 - Min 0.105
|
|
Minor Thread Diameter: (#4) Max 0.100 - Min 0.089
|
|
Thread Pitch: 22 per Inch (Coarse)
|
|
Head Diameter: Max 0.225 - Min 0.195
|
|
Countersink: 82 Degree
|
|
Overall Head Height: Max 0.067 - Min 0.055
|
|
Phillips Driver: #1
|
|
Material: Solid Brass
|
Product Specifications may vary slightly +/-
within IFI Tolerances
|
Wood Screws are usually threaded about 2/3 of length; short lengths may be full thread.
Sizes Listed As:
Diameter x Length from Top of Head
.jpg)
