Machine Screws, Phillips Truss Head, Stainless Steel 18-8, #10-32 x 1/4"
Diameter - Thread Pitch: #10-32
| Quantity | Unit price |
|---|---|
| To 99 |
$0.15*
|
| To 999 |
$0.08*
|
| From 1000 |
$0.07*
|
- ANSI: ANSI B18.6.3
- Class: 2A
- Color: Silver
- Condition: New
- Corrosion Resistant: Yes
- Diameter: #10
- Drive Style: Phillips
- Elongation: 30%
- Head Type: Truss Head
- Thread Direction: Right Hand
- Thread Type: Fine
- Fit: 2A
- Grade: 18-8
- Hardness: 100 Rockwell B
- Head Height Max: 0.118
- Head Diameter: Max 0.488 - Min 0.425
- Head Style: Truss
- Length: 1/4"
- Material: Stainless Steel
- Overall Head Height: Max 0.118 - Min 0.103
- Part Number: 717029191090
- Phillips Drive: #2
- Product Type: Machine Screws
- Reduction: 0.4
- Size Type: Regular
- Standards Met: ANSI B18.6.3
- System of Measurement: Inch
- Tensile PSI: 100,000 - 125,000 PSI
- Thread Direction: Right Hand
- Thread Pitch: 32 Per Inch
- Thread Size: #10-32
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
- Yield PSI: 55,000 - 75,000 PSI
- Truss Head: Over-sized head with undercut bottom and low profile domed top
- Lower profile than pan head screws
- A machine screw is commonly identified by its small size
- Distributes the force of the screw over a wider surface area
- 18-8 Stainless steel Phillips head machine screws are rust and corrosion resistant in applications exposed to freshwater moisture
#10-32 Phillips truss head machine screws are available in 18-8 stainless steel.
Product number:
11600002