Machine Screws, Phillips Truss Head, Stainless Steel 18-8, #10-24

Machine Screws, Phillips Truss Head, Stainless Steel 18-8, #10-24

Diameter - Thread Pitch: #10-24


  • Truss Head: Over-sized head with undercut bottom and low profile domed top
  • Lower profile than pan head screws
  • A machine screw is commonly identified by its small size
  • Distributes the force of the screw over a wider surface area
  • 18-8 Stainless steel Phillips head machine screws are rust and corrosion resistant in applications exposed to freshwater moisture

#10-24 Phillips truss head machine screws are available in 18-8 stainless steel.

Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size/SKU
Select Package Quantity Price
SubTotal
#10-24 x 1/4"
#10-24 x 1/4"
1 $0.12 (0.12/ea)
100 $7.00 (0.07/ea)
1000 $60.00 (0.06/ea)
Subtotal: $0.00 /
#10-24 x 5/16"
#10-24 x 5/16"
1 $0.14 (0.14/ea)
100 $8.00 (0.08/ea)
1000 $70.00 (0.07/ea)
Subtotal: $0.00 /
#10-24 x 3/8"
#10-24 x 3/8"
1 $0.15 (0.15/ea)
100 $8.00 (0.08/ea)
1000 $70.00 (0.07/ea)
Subtotal: $0.00 /
#10-24 x 1/2"
#10-24 x 1/2"
1 $0.16 (0.16/ea)
100 $8.00 (0.08/ea)
1000 $70.00 (0.07/ea)
Subtotal: $0.00 /
#10-24 x 5/8"
#10-24 x 5/8"
1 $0.17 (0.17/ea)
100 $8.00 (0.08/ea)
1000 $70.00 (0.07/ea)
Subtotal: $0.00 /
#10-24 x 3/4"
#10-24 x 3/4"
1 $0.18 (0.18/ea)
100 $9.00 (0.09/ea)
1000 $80.00 (0.08/ea)
Subtotal: $0.00 /
#10-24 x 7/8"
#10-24 x 7/8"
1 $0.16 (0.16/ea)
100 $13.00 (0.13/ea)
1000 $120.00 (0.12/ea)
Subtotal: $0.00 /
#10-24 x 1"
#10-24 x 1"
1 $0.13 (0.13/ea)
100 $11.00 (0.11/ea)
1000 $100.00 (0.1/ea)
Subtotal: $0.00 /
#10-24 x 1-1/4"
#10-24 x 1-1/4"
1 $0.23 (0.23/ea)
100 $12.00 (0.12/ea)
1000 $110.00 (0.11/ea)
Subtotal: $0.00 /
#10-24 x 1-1/2"
#10-24 x 1-1/2"
1 $0.24 (0.24/ea)
100 $14.00 (0.14/ea)
1000 $120.00 (0.12/ea)
Subtotal: $0.00 /
#10-24 x 1-3/4"
#10-24 x 1-3/4"
1 $0.16 (0.16/ea)
100 $13.00 (0.13/ea)
1000 $120.00 (0.12/ea)
Subtotal: $0.00 /
#10-24 x 2"
#10-24 x 2"
1 $0.30 (0.3/ea)
100 $17.00 (0.17/ea)
1000 $150.00 (0.15/ea)
Subtotal: $0.00 /

Frequently Used With

1 $1.04 (1.04/ea)
10 $8.10 (0.81/ea)
50 $38.00 (0.76/ea)
Subtotal: $0.00
1 $0.08 (0.08/ea)
100 $5.00 (0.05/ea)
1000 $40.00 (0.04/ea)
Subtotal: $0.00
1 $0.07 (0.07/ea)
100 $3.00 (0.03/ea)
1000 $20.00 (0.02/ea)
Subtotal: $0.00
1 $0.07 (0.07/ea)
100 $3.00 (0.03/ea)
1000 $20.00 (0.02/ea)
Subtotal: $0.00
1 $0.12 (0.12/ea)
100 $8.00 (0.08/ea)
1000 $70.00 (0.07/ea)
Subtotal: $0.00

Product Specifications
ANSI
ANSI B18.6.3
Class
2A
Color
Silver
Corrosion Resistant
Yes
Diameter
#10
Drive Style
Phillips
Elongation
30%
Fit
Class 2A
Grade
18-8
Hardness
100 Rockwell B
Head Diameter
Max 0.488 - Min 0.425
Head Height Max
0.118
Head Style
Truss
Material
Stainless Steel
Overall Head Height
Max 0.118 - Min 0.103
Phillips Drive
#2
Product Type
Machine Screws
Reduction
40%
Standards Met
ANSI B18.6.3
System of Measurement (Unit)
Inch
Tensile PSI
100,000 - 125,000 PSI
Thread Direction
Right Hand
Thread Pitch (Count)
24 Per Inch
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
Yield PSI
55,000 - 75,000 PSI