To place an order, scroll down and enter quantities in the multi-add grid and click "add selected to cart". For product details, select any SKU or size and click the Description and Specifications tabs. Scroll to the bottom for related items.
Metric Hex Tap Bolts, Stainless Steel A4 (316), M6-1.00 x 100M
Diameter - Thread Pitch: M6-1.00
| Quantity | Unit price |
|---|---|
| 1 – 99 |
$0.83*
|
| 100 – 999 |
$0.71*
|
| 1000+ |
$0.65*
|
- Across Flats (Width): 10mm (Max 10.00mm - Min 9.78mm)
- Color: Silver
- Corrosion Resistant: Yes
- Diameter: M6
- Drive Style: External Hex
- Head Type: Hex Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Fit: 6g
- FT = Full Thread: Yes
- Grade: A4
- Head Height: 2.8mm
- Head Height Basic: 4 mm
- Head Style: Hex
- Length: 100mm
- Material: Stainless Steel
- Product Type: Metric Hex Head Tap Bolts
- System of Measurement: Metric
- Tensile PSI: 100,000 - 125,000
- Thread Direction: Right Hand
- Thread Pitch: 1.00 mm
- Thread Size: M6
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Wrench Size: 10mm
- Yield PSI: 55,000 - 75,000
|
Manufactured from A4 (316) stainless steel, this M6 x 1.0mm hex tap bolt delivers the corrosion resistance needed for marine, chemical, and high-humidity environments where standard stainless grades fall short. The 316 designation indicates added molybdenum content that significantly improves resistance to chlorides, saltwater, and aggressive chemicals. The partial thread shank below the hex head carries shear loads through solid bolt body rather than across the threads, improving fatigue life and joint performance under lateral forces. These tap bolts are widely specified for boat and dock hardware, food and beverage processing equipment, medical devices, and chemical plant assemblies where long-term corrosion-free service is required.
A Hex Bolt is measured as: Diameter - Thread Pitch x Length from Under Head