To place an order, scroll down and enter quantities in the multi-add grid and click "add selected to cart". For product details, select any SKU or size and click the Description and Specifications tabs. Scroll to the bottom for related items.
Metric Hex Cap Screws, Class 8.8, Zinc Plated Steel, M8-1.00 x 100M PT
Diameter - Thread Pitch: M8-1.0
| Quantity | Unit price |
|---|---|
| 1 – 99 |
$1.84*
|
| 100 – 999 |
$1.68*
|
| 1000+ |
$1.53*
|
- Across Flats (Width): 13mm (Max 12.98mm - Min 12.79mm)
- Additional Sizing Info: FT = Full Thread, PT = Partial Thread
- Color: Silver
- Diameter: M8
- Drive Style: External Hex
- Head Type: Hex Head
- Thread Direction: Right Hand
- Thread Type: Fine
- Finish: Zinc Plated
- Fit: 6g
- FT = Full Thread: No
- Grade: 8.8
- Head Height: Max 5.45 - Min 5.15
- Head Height Basic: 5.3 mm
- Head Style: Hex
- Length: 100m
- Material: Steel
- Part Number: 1078-008
- Product Type: Metric Hex Cap Screw
- System of Measurement: Metric
- Thread Direction: Right Hand
- Thread Pitch: 1.0 mm
- Thread Size: M8
- Thread Standard: UNF
- Thread Type: Fine
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Wrench Size: 13mm
|
This M8 x 1.0mm fine thread hex cap screw is manufactured from Class 8.8 steel with a zinc plated finish for corrosion protection in general industrial environments. The fine thread pitch provides a tighter helix angle than the standard M8 x 1.25mm coarse thread, resulting in higher tensile strength per bolt, greater resistance to vibrational loosening, and finer adjustment capability during installation. Class 8.8 steel delivers approximately 800 MPa tensile strength, making it the standard metric grade for general-purpose structural and mechanical connections. Available in both partial and full thread configurations, these fine pitch hex cap screws serve applications in precision machinery, automotive assemblies, and vibration-sensitive equipment where thread security and accurate clamping control are critical.
A Hex Bolt is measured as: Diameter - Thread Pitch x Length from Under Head
FT = Full Thread
PT = Partial Thread