M10-1.50 Zinc Plated Metric Hex Cap Screws
Diameter - Thread Pitch: M10-1.50
- M10-1.50
- Metric hex head is designed to be driven by a socket or wrench
- Also referred to as metric tap bolts or hex bolts
- A metric tap bolt has a smaller head than a standard hex head bolt
- Zinc plated steel is corrosion resistant
- DIN 930-933/ISO 4014-4017 compliant
A Hex Bolt is measured as: Diameter - Thread Pitch x Length from Under Head
FT = Full Thread
PT = Partial Thread
See Product Specifications
Select Package Quantity
Loading ...
Product Specifications
Across Flats (Width)
16mm (Max 17.00mm - Min 16.73mm)
Drive Style
External Hex
Finish
Zinc Plated
Grade
10.9 (Grade 8 Metric Equivalent)
Head Height
Max 6.58 - Min 6.22
Head Style
Hex
Material
Steel
Product Type
Metric Hex Cap Screws
System of Measurement (Unit)
Millimeter
Thread Direction
Right Hand
Thread Pitch (Count)
1.5 mm
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
Wrench Size
16mm
