Hot Dip Galvanized Lock Washers
Medium Profile Split Ring Lock Washers
- Used to prevent fasteners from loosening unintentionally
- Split and bent to create a spring-like effect
- Add extra pressure to fastener assembly resulting in higher resistance to rotation
- Hot dipped galvanized steel for superior corrosion resistance
- Only use Hot dipped galvanized with other HDG fasteners
- Actual measurements may vary slightly +/- depending on production run
Hot Dipped Galvanized Lock Washer Specifications
| Sizes | Outer Diameter (OD) | Inner Diameter (ID) |
| 1/4" | 0.487" | 0.260" |
| 5/16" | 0.583" | 0.322" |
| 3/8" | 0.680" | 0.385" |
| 1/2" | 0.869" | 0.512" |
| 5/8" | 1.072" | 0.640" |
| 3/4" | 1.264" | 0.765" |
| 7/8" | 1.455" | 0.890" |
| 1" | 1.647" | 1.015" |
| 1-1/8" | 1.847" | 1.153" |
| 1-1/4" | 2.036" | 1.280" |
| 1-1/2" | 2.419" | 1.504" |
See Product Specifications
Select Package Quantity
Loading ...
Product Specifications
Color
Gray
Corrosion Resistant
Yes
Finish
Hot Dip Galvanized
Material
Steel
Product Type
Split Ring Lock Washer
System of Measurement (Unit)
Inch
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
