Join Our Newsletter
Receive the latest news on new promotions,
exclusive offers, and new arrivals.
Yellow Zinc Flat Washers - Grade 8 SAE
Thru Hardened Yellow Zinc Flat Washers
- Grade 8 flat washers in SAE are measured in Inch sizes
- Made of through hardened Grade 8 steel with a yellow zinc plating
- Used to provide ease of movement for spinning parts, or when the hole holding the fastener assembly is larger than the finishing nut
- IFI Tolerances Apply
- Washer Thickness may very +/- .02 depending on production run.
- REACH and RoHS Compliant
| Flat Washer Sizes | Inner Diameter (ID) | Outer Diameter (OD) | Washer Thickness |
| 1/4" | 0.281" | 5/8" | 0.065" |
| 5/16" | 0.344" | 0.688" | 0.065" |
| 3/8" | 0.406" | 0.812" | 0.065" |
| 7/16" | 0.469" | 0.922" | 0.065" |
| 1/2" | 0.531" | 1.062" | 0.097" |
| 9/16" | 0.594" | 1.156" | 0.097" |
| 5/8" | 0.656" | 1.312" | 0.097" |
| 3/4" | 0.812" | 1.469" | 0.133" |
| 7/8" | 0.938" | 1-3/4" | 0.133" |
| 1" | 1.062" | 2" | 0.133" |
| 1-1/8" | 1.250" | 2-1/4" | 0.133" |
| 1-1/4" | 1.375" | 2-1/2" | 0.163" |
| 1-1/2" | 1.625" | 3" | 0.183" |
See Product Specifications
NA = "Not Sold In Single Quantity"
Select Package Quantity
Loading ...
Product Specifications
Finish
Yellow Zinc Plated
Grade
Grade 8
Material
Steel
System of Measurement (Unit)
Inch
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
