Why hot dipped galvanized for shoulder pattern eye bolts?
Hot dip galvanizing immerses the eye bolt in molten zinc for a much thicker coating than electroplating, giving lasting corrosion resistance for outdoor and wet rigging, which is why galvanized is standard for exterior lifting points. The shoulder allows angular lifting when seated completely flush, with the same derating rule: capacity drops to about 25% of the vertical rating at 45 degrees, the maximum acceptable angle. Pair galvanized eye bolts with galvanized hardware. For the harshest coastal exposure, stainless offers more resistance. Always apply the manufacturer's angle derating, ensure the shoulder is flush, and inspect before each lift.
Why choose hot dipped galvanized shoulder pattern eye bolts
- Angular and vertical lifts: shoulder handles side loads when seated flush.
- Thick zinc coating: lasting corrosion resistance outdoors.
- Outdoor durable: for exterior rigging and lifting points.
- Match coating: pairs with galvanized hardware.
Common applications for galvanized shoulder pattern eye bolts
- Outdoor angular and vertical lifts
- Bridle slings and multi-point picks
- Exterior machinery lifting points
- Wet and weather-exposed rigging
For indoor use, see zinc plated steel shoulder pattern eye bolts, and browse every material on the main eye bolts category.
Hot Dipped Galvanized Shoulder Pattern Eye Bolts FAQ
Can I use these for angular lifts?
Yes, if the shoulder is seated completely flush and the capacity is derated for the load angle. At 45 degrees, capacity drops to about 25% of the vertical rating.
How is galvanized different from zinc plated?
Hot dip galvanizing gives a much thicker, more durable zinc coating than electroplated zinc, so it lasts far longer outdoors.
Does the shoulder need to be flush?
Yes. The shoulder must seat completely flush against the load surface to function safely under angular loads.