Sleeve Anchors, Zinc Plated Steel, 5/16" x 1-1/2"
Diameter: 5/16"
| Quantity | Unit price |
|---|---|
| To 99 |
$0.40*
|
| To 999 |
$0.36*
|
| From 1000 |
$0.35*
|
- Across Flats (Width): 1/2" (Max 0.500 - Min 0.489)
- Color (Duplicate): Silver
- Color: Silver
- Condition: New
- Diameter: 5/16"
- Drill (Hole) Size: 5/16"
- Drive Style: External Hex
- Head Type: No Head
- Thread Direction: Right Hand
- Finish: Zinc Plated
- Head Style: No Head
- Length: 1-1/2"
- Material (Duplicate): Steel
- Material: Zinc Plated Steel
- Part Number: 1082-002
- Product Type: Home > Anchors & Masonry Bolts > Sleeve Anchors > Sleeve Anchors Zinc
- Size System: US
- Size Type: Regular
- Standards Met: REACH and RoHS Compliant
- System of Measurement: Inch
- Thread Direction: Right Hand
- Thread Pitch: 18 Per Inch
- Thread Size: 5/16"
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Washer Thickness: 0.08
- Weight: 1 lb
- Wrench Size: 7/16"
- Used for hollow concrete masonry units
- Made up of a threaded stud and an outwardly flared cone-shaped end with a nut and washer
- Inserted into pre-drilled holes then expanded for a secure fit
- Zinc plating encases plain steel alloy and provides a layer of corrosion resistance
A 5/16" Zinc plated steel concrete masonry sleeve anchor is used to secure material and equipment to masonry surfaces.
REACH and RoHS Compliant
Product number:
1082-002-0002