Metric Nylon Lock Nuts, Zinc Plated Steel, Class 10

Metric Nylon Lock Nuts, Zinc Plated Steel, Class 10

Nylon Insert Lock Nuts in DIN 985 Standard Metric Sizes - Zinc Plated Class 10 Steel


  • Metric Nylon Insert Lock Nuts - Also referred to as Nylon Lock Nuts, Lock Nuts, Stop Nuts or Nylock Nuts
  • Nylon material creates pressure against the fastener which prevents accidental loosening due to vibration
  • DIN 985 Sizing Specifications
  • CR+3 Case Hardened Zinc Plated Class 10 Steel

Reference Materials


Metric Nylon Lock Nut Size Chart

Metric Nylon Lock Nut Size Chart (PDF) - Print Friendly, 138Kb

Metric Nylon Lock Nuts feature a nylon insert at the top of the nut to apply a compressive force against the male threads being fastened into the nut. This locking mechanism helps to prevent accidental loosening after installation due to vibration. Metric Nylon Lock Nuts in this selection are made from CR+3 Case Hardened Zinc Plated Class 10 Steel and manufactured to DIN 985 size specifications.

Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size/SKU
Select Package Quantity Price
SubTotal
1 $0.40 (0.4/ea)
100 $8.00 (0.08/ea)
1000 $30.00 (0.03/ea)
Subtotal: $0.00 /
1 $0.40 (0.4/ea)
100 $8.00 (0.08/ea)
1000 $30.00 (0.03/ea)
Subtotal: $0.00 /
1 $0.15 (0.15/ea)
100 $9.00 (0.09/ea)
1000 $80.00 (0.08/ea)
Subtotal: $0.00 /
1 $0.19 (0.19/ea)
100 $11.00 (0.11/ea)
1000 $100.00 (0.1/ea)
Subtotal: $0.00 /
1 $0.32 (0.32/ea)
100 $20.00 (0.2/ea)
1000 $180.00 (0.18/ea)
Subtotal: $0.00 /
1 $0.41 (0.41/ea)
100 $26.00 (0.26/ea)
1000 $240.00 (0.24/ea)
Subtotal: $0.00 /
1 $0.90 (0.9/ea)
100 $53.00 (0.53/ea)
1000 $480.00 (0.48/ea)
Subtotal: $0.00 /
1 $1.39 (1.39/ea)
100 $81.00 (0.81/ea)
1000 $730.00 (0.73/ea)
Subtotal: $0.00 /
1 $1.83 (1.83/ea)
100 $107.00 (1.07/ea)
1000 $960.00 (0.96/ea)
Subtotal: $0.00 /
1 $2.39 (2.39/ea)
100 $221.00 (2.21/ea)
1000 $2,190.00 (2.19/ea)
Subtotal: $0.00 /

Product Specifications
Color
Silver
Finish
Zinc Plated
Material
Steel
System of Measurement (Unit)
Metric
Thread Direction
Right Hand
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances