1/4"-20 Base Thread for optional tripod or suction cup mounts (sold seperately)
USB Rechargeable Battery
The handle rotates 360 degrees, with 12 intended positions
The rugged WorkStar® 810 commercial grade professional LED work light is designed for daily use by technicians in demanding shop, manufacturing and maintenance environments. The tough ABS body, polycarbonate lens and nylon handle are virtually indestructible. The rugged power switch is rated at 50,000 cycles and is sealed to avoid contamination by dirt and grit. It's a great cordless inspection light for HVAC and auto techs, as well as other trades like plumbers and electricians.
9 LEDs arranged in a square patten + a custom designed lens creates a round floodlight beam - no rings, no shadows, no hot spots. The beam diameter to distance ratio is about 2:1, meaning for example, the beam diameter is about 4 ft wide when the light is 2 ft from an object. The ANSI FL-1 beam throw is 108 ft (33 m).
Power/Brightness Switch
Sealed power switch cycles through Low-High-Off
Battery Included
3.7V 1800mAh LiPo (Li-ion Polymer) rechargeable battery; USB recharging cord included
Run Time
High: 2 hours, Medium: 4.5 hours, Low: 5 hours
Recharge Time
3 hours
Battery Life and Charge Indicator
4 green LEDs work in 25% increments to show the battery level while in use and while charging
Charging Input
Micro USB
Body Material
ABS Plastic
Magnetic Base
Built into the base of the handle is a powerful magnet with a protective covering
Tripod Socket
Built into the base of the handle is a standard camera 1/4"-20 tripod socket, which is the mounting point for the optional octopus tripod stand and the optional suction cup
Handle
The handle rotates 360 degrees with 12 indented positions. It can be used as a handle, a stand, or the built in magnet can be fastened to ferrous metal surfaces so the light can be aimed. It is also the mounting point for the optional octopus tripod stand and the optional suction cup.
Length
3 1/2 inches (9 cm), with handle 4 1/4 (11 cm)
Width
2 3/8 inches (6 cm), with handle 3 (7.5 cm)
Thickness
1 inch (2.5 cm)
Weight
7 ounces (200 grams)
Temperature
15° to 105°F (-10° to +40°C)
Ingress Protection
IP64 = water resistant, i.e., protection from rain, sprays and splashing of water in all directions. But not waterproof, do not immerse in liquids.
Impact Test
IK07 = 2 J
Drop Test
6 ft (2 m)
Included
WorkStar® 810, 18 inch (45 cm) USB charging cord
Play video
Cyclops - Maxxeon Workstar 810 LED Work Light | Fasteners 101
