USB port to charge cellphones, tablets or penlights
Aluminum body with rubber bumper
Powerful Neodymium magnetic base (included) attaches to the nylon handle
COB LEDs plus the unique "fresnel-like" lens creates an ultra wide floodlight beam without rings, shadows, or hot spots
Nylon handle tilts 180 degrees and acts like a support leg or mounting point
The Maxxeon WorkStar® 5400 LUMENATOR®Sr task light is engineered for practicality and performance. The hexagonal shape works with the nylon stand for easy and stable positioning, and also has a mounting hole for the included magnetic base or a tripod. The Chips On Board (COB) LED system allows for three powerful light settings, while still maintaining a workable battery life. The diameter to distance ratio is about 3:1, meaning for example, the beam diameter is about 9 ft wide when the light is 3 ft from an object. This industrial grade work light can light up a whole room, an engine bay, or a campsite, you name it. It is flexible, versatile and tough.
50 W COB (chips on board), CRI > 80, Daylight White, 5700K
Heat Sink
LED is mounted in a sealed aluminum heat sink assembly, which protects the LED from dirt and fluids
Power/Brightness Switch
Sealed power switch controls the 3 brightness levels: LOW-MEDIUM-HIGH-OFF
Beam Ratio
The COB LEDs plus the unique glass lens creates an ultra wide floodlight beam - no rings, no shadows, no hot spots. The beam diameter to distance ratio is about 3:1, meaning for example, the beam diameter is about 6 ft wide when the light is 2 ft from an object.
Batteries Included
Li-ion 11.1 volt, 5200 mAh battery pack. Pack is user replaceable
Run Time
High: 1.5 hours, Medium: 3 hours Low: 6 hours
Recharge Time
3.5 hours
Regulator Circuit
High efficiency constant current circuit to maximize brightness and runtime
Battery Life and Charge Indicator
Three green LEDs are arranged in a bar graph format to indicate both the battery life and the charge level
Wall Power Supply/Charger
Input: 100-220 VAC, 50/60 Hz UL-Approved North American power supply with standard "Type A", two prong plug. Output: 15 VDC, 1.5 A. Use only the supplied the MXN10157 Power Supply. The LUMENATOR®Sr is not compatible with the original LUMENATOR® MXN10080 Li-ion Charger.
USB Output
5 VDC, 1 A
Operate While Charging
Safe to operate the light while charging or plugged in
Body
Aluminum with rubber edge protector
Handle
The sturdy nylon handle rotates 180?? to adjust the light angle and it is the mounting point for optional tripod stand and included magnetic base
Dimsensions
10.5 x 9.5 x 2.25 inches (27 x 24 x 6 cm)
Weight
3 lb (1.4 kg)
Temperature
15° to 105°F (-10° to +40°C)
Ingress Protection
IP65 = dust tight + waterproof to water jets and rain
Impact Test
IK07 = 2 J
Drop Test
6 ft (2 m)
Included
WorkStar® 5400, a user replaceable 11.1 VDC, 5.2 Ah Li-ion battery pack and a 100-240 VAC, 50/60 Hz, 15 VDC, 1.5 A UL-approved power supply, Magnetic Base
Play video
Lumenator - Maxxeon Workstar 5000 Series LED Work Light | Fasteners 101
