M6 x 1.0 Metric Flush Hex Drive Threaded Inserts

M6-1.00 EZ Hex Flush Threaded Inserts

Metric Hex Drive Threaded Inserts for Soft Wood


  • Internal Thread Size: M6-1.00
  • Made from Die Cast Zinc
  • Runs Flush with Installation Surface
  • Hex Drive
  • Intended for use in Soft Wood or Composites

Flush Hex Drive Threaded Inserts are installed the same way as any other threaded insert. They do not have a lip near the head, so they can be installed completely flush with the surface or even a little countersunk. Flush drive threaded inserts are generically referred to as Type E insert nuts.

Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size
Select Package Quantity
SubTotal
Metric Flush Hex Drive Threaded Inserts M6 x 1.0 x 0.512"
SKU #1060-438-002
Metric Flush Hex Drive Threaded Inserts M6 x 1.0 x 0.512"
SKU #1060-438-002
1
$0.20 (0.2/ea)
100
$19.00 (0.19/ea)
1000
$180.00 (0.18/ea)
Subtotal: $0.00 /
Metric Flush Hex Drive Threaded Inserts M6 x 1.0 x 0.787"
SKU #1060-438-012
Metric Flush Hex Drive Threaded Inserts M6 x 1.0 x 0.787"
SKU #1060-438-012
1
$0.36 (0.36/ea)
100
$34.00 (0.34/ea)
1000
$320.00 (0.32/ea)
Subtotal: $0.00 /

Product Specifications
Color
Yellow/Silver
Drill (Hole) Size
23/64"
Drive Style
Internal Hex (Allen)
Head Style
No Head
Internal Thread
M6 x 1.0
Material
Zinc
Product Type
Thread Insert
System of Measurement (Unit)
Millimeter
Thread Direction
Right Hand
Thread Pitch (Count)
1 mm
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances