Metric Hex Flange Bolts Zinc Plated Class 10.9 Steel M12-1.75

M12-1.75 Flange Bolts Class 10.9 Zinc | DIN 6921

Zinc Plated Class 10.9 Steel Hex Head Flange Bolts


  • M12-1.75 (DIN 6921 sizing standards)
  • Hex bolt with flange designed to be driven by a wrench or socket
  • Also referred to as metric flange tap bolts
  • Flange head to prevent pull-through and distribute pressure across a wider surface area
  • Class 10.9 Steel
  • Zinc Plated finish for durability
  • Built in integral washer to distribute pressure over a greater surface area and prevent pull-through

A hex flange bolt is a fully threaded hex bolt with an integral washer designed to prevent pull through of the bolt. Flange bolts in this selection are made of Class 10.9 (the Metric Grade 8 equivalent), and are zinc plated for corrosion resistance and durability.

A Hex Bolt is measured as: Diameter - Thread Pitch x Length from Under Head

Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size
Select Package Quantity
SubTotal
Flange Bolt Zinc Plated Class 10.9 Steel M12-1.75 x 30M
SKU #1022-228-012
Flange Bolt Zinc Plated Class 10.9 Steel M12-1.75 x 30M
SKU #1022-228-012
1
$1.54 (1.54/ea)
25
$37.75 (1.51/ea)
100
$143.00 (1.43/ea)
1000
$1,410.00 (1.41/ea)
Subtotal: $0.00 /
Flange Bolt Zinc Plated Class 10.9 Steel M12-1.75 x 35M
SKU #1022-228-022
Flange Bolt Zinc Plated Class 10.9 Steel M12-1.75 x 35M
SKU #1022-228-022
1
$1.65 (1.65/ea)
25
$39.50 (1.58/ea)
100
$153.00 (1.53/ea)
1000
$1,510.00 (1.51/ea)
Subtotal: $0.00 /
Flange Bolt Zinc Plated Class 10.9 Steel M12-1.75 x 40M
SKU #1022-228-032
Flange Bolt Zinc Plated Class 10.9 Steel M12-1.75 x 40M
SKU #1022-228-032
1
$1.76 (1.76/ea)
25
$42.50 (1.7/ea)
100
$165.00 (1.65/ea)
1000
$1,620.00 (1.62/ea)
Subtotal: $0.00 /



FREQUENTLY USED WITH

1
NA
25
$5.25 (0.21/ea)
100
$19.00 (0.19/ea)
1000
$190.00 (0.19/ea)
Subtotal: $0.00 /
1
NA
25
$5.50 (0.22/ea)
100
$15.00 (0.15/ea)
1000
$130.00 (0.13/ea)
Subtotal: $0.00 /

Product Specifications
Color
Silver
Diameter
M12 (12mm)
Drive Style
External Hex
Finish
Zinc Plated
Flange Diameter
Max 26.60mm
Grade
Class 10.9
Head Height Max
11.50mm
Head Size
16mm
Head Style
Hex Flange
Material
Steel
Standards Met
DIN 6921
System of Measurement (Unit)
Metric
Thread Diameter
M12 (12mm)
Thread Pitch (Count)
1.75 mm
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances