
KapToggle® Hollow Wall Anchors
Reusable Anchors for use with Bolts or Machine Screws
- Can be used on drywall, sheet rock, gypsum board or masonry block
- Installs in seconds
- 3 times stronger than standard wall fasteners
- 3 Piece Design: Metal Toggle, Serrated Nylon Strap, and Shoulder Washer
- Washer slides down strap and fits snug to the predrilled hole on the front side of the assembly. After installation, the extra length of the strap snaps off
- Also referred to as togglers, toggle bolts, snap toggles or zip toggles
- Nylon and Zinc Plated Steel construction
- Machined female threads and locking mechanism allows for fixtures to be installed or removed over and over without losing the toggle
- Patented design eliminates the need for longer bolts, which saves space and money
- Installation allows for perfect washer - Toggle alignment eliminating mis aligned installations
- 1/8 inch and 3/16 inch KapToggles are USA Made
KapToggle® Installation Instructions
Sizes Listed as: KapToggle® Diameter x Internal Threading
KapToggle® Pull-Through Strength:
KapToggle® Size: | Material: | Tested Pull-Through Load (lbs): | Recommended Working Load (lbs): |
1/8" 1-1/2" Toggle Length |
3/8" Gypsum Board 1/2" Gypsum Board 5/8" Gypsum Board Masonry Block |
68 111 124 307 |
23 37 41 102 |
3/16" 2" Toggle Length |
3/8" Gypsum Board 1/2" Gypsum Board 5/8" Gypsum Board Masonry Block |
68 115 133 452 |
23 38 44 150 |
1/4" 2" Toggle Length |
3/8" Gypsum Board 1/2" Gypsum Board 5/8" Gypsum Board Masonry Block |
96 121 123 1,091 |
32 40 41 363 |