Phillips Slotted Combo Drive Sidewalk Bolts, Stainless Steel 18-8 1/4"-20 x 1/2"
Oversized Truss Head 18-8 Stainless Steel Hurricane Bolts
| Quantity | Unit price |
|---|---|
| To 99 |
$0.49*
|
| To 999 |
$0.35*
|
| From 1000 |
$0.33*
|
- Color: Silver
- Corrosion Resistant: Yes
- Diameter: 1/4"
- Drive Style: Phillips / Slotted
- Head Type: Oversize Truss Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Fit: 2A
- Grade: 18-8
- Head Height: Max 0.126" - Min 0.110"
- Head Diameter: Max 0.755" - Min 0.738"
- Head Style: Oversize Truss
- Length: 1/2"
- Material: Stainless Steel
- Phillips Drive: #3
- Product Type: Sidewalk Bolts
- System of Measurement: Inch
- Thread Direction: Right Hand
- Thread Pitch: 20 Per Inch
- Thread Size: 1/4"-20
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Also referred to as: Sidewalk Bolts, Sidewalk Screws, Hurricane Bolts and Hurricane Screws
- Corrosion and Rust Resistant 18-8 Stainless Steel
- A machine screw is commonly identified by its small size
- Often used with female threaded concrete anchors
- Oversized Diameter Low Profile Head
- Phillips / Slotted Combo Drive Style for convenience
Stainless steel Sidewalk Bolts are often referred to as Hurricane Bolts because their most common application is installing hurricane shutters. They are also referred to as Sidewalk Bolts because of their ultra low profile head which can be easily stepped on or rolled over which is why they are also often used with concrete anchors to attach materials and fixtures to masonry surfaces. Sidewalk bolts in this selection are made of 18-8 stainless steel to withstand the elements without corroding or rusting and feature a drive that can be installed using a Phillips or Slotted Screwdriver / bit.
Frequently Used With
