Carbon Steel Jaw and Jaw Turnbuckles

Carbon Steel Jaw and Jaw Turnbuckles

Forged Lifting Hardware | Carbon Steel


  • Consist of an open frame or body and two jaw bolt end fittings
  • Should only be applied in a straight, in-line manner only
  • The larger the thread diameter of the end fitting, the more load capacity the turnbuckle will have
  • The longer the length of the turnbuckle body, the more slack it can take when tightening or loosening the turnbuckle

Carbon Steel Jaw and Jaw Turnbuckle is a device used to adjust the tension or length of ropes, cables, tie rods, and other tension systems.

Please Note: Turnbuckles are not eligible for free shipping. Measured by Take-Up or the inside length of the frame that's visible.

Stainless Steel Jaw and Jaw Turnbuckles

Sizes listed as: Diameter - Thread Pitch x Take-Up Length



Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size
Select Package Quantity
SubTotal
Turnbuckle Assembly Jaw & Jaw Carbon Steel - 3/8"-16 x 6"
SKU #1586-004-0002
Turnbuckle Assembly Jaw & Jaw Carbon Steel - 3/8"-16 x 6"
SKU #1586-004-0002
1
$38.37 (38.37/ea)
10
$330.00 (33/ea)
Subtotal: $0.00 /
Turnbuckle Assembly Jaw & Jaw Carbon Steel - 1/2"-13 x 6"
SKU #1586-004-0006
Turnbuckle Assembly Jaw & Jaw Carbon Steel - 1/2"-13 x 6"
SKU #1586-004-0006
1
$45.78 (45.78/ea)
10
$393.70 (39.37/ea)
Subtotal: $0.00 /
Turnbuckle Assembly Jaw & Jaw Carbon Steel - 1/2"-13 x 9"
SKU #1586-004-0010
Turnbuckle Assembly Jaw & Jaw Carbon Steel - 1/2"-13 x 9"
SKU #1586-004-0010
1
$85.00 (85/ea)
10
$731.00 (73.1/ea)
Subtotal: $0.00 /
Turnbuckle Assembly Jaw & Jaw Carbon Steel - 1/2"-13 x 12"
SKU #1586-004-0014
Turnbuckle Assembly Jaw & Jaw Carbon Steel - 1/2"-13 x 12"
SKU #1586-004-0014
1
$89.38 (89.38/ea)
10
$768.70 (76.87/ea)
Subtotal: $0.00 /

Product Specifications
Color
Black
Head Style
Jaw/Jaw
Material
Carbon Steel
Product Type
Turnbuckle Assemblies
System of Measurement (Unit)
Inch
Thread Direction
Right Hand
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
USA Made
Yes