#6-20 Star Drive 6-Lobe Flat Head Self Driller Security Screws

#6-20 Star Drive with Pin Security Flat Head Self Driller Screws

Diameter - #6 | Security Star Drive Size - T-10


  • #6-20
  • Tamper Proof Star Drive Size - T-10
  • Fully threaded
  • Anti-vandalism
  • Unusual drive style prevents conventional screwdrivers from tampering
  • Feature a self drilling TEK 3 tip and a countersunk head
  • 410 Stainless steel star drive flat head self drilling screws are corrosion resistant and hardened to make drilling easier
  • NOTE: Sheet metal screws provide excellent retention in wood but are very difficult to remove
Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size
Select Package Quantity
SubTotal
Star Drive 6-Lobe Flat Head Self Driller Security Screws - #6 x 1/2"
SKU #1021000-0002
Star Drive 6-Lobe Flat Head Self Driller Security Screws - #6 x 1/2"
SKU #1021000-0002
1
$0.22 (0.22/ea)
100
$18.00 (0.18/ea)
1000
$160.00 (0.16/ea)
Subtotal: $0.00 /
Star Drive 6-Lobe Flat Head Self Driller Security Screws - #6 x 3/4"
SKU #1021000-0012
Star Drive 6-Lobe Flat Head Self Driller Security Screws - #6 x 3/4"
SKU #1021000-0012
1
$0.30 (0.3/ea)
100
$25.00 (0.25/ea)
1000
$230.00 (0.23/ea)
Subtotal: $0.00 /
Star Drive 6-Lobe Flat Head Self Driller Security Screws - #6 x 1-1/4"
SKU #1021000-0032
Star Drive 6-Lobe Flat Head Self Driller Security Screws - #6 x 1-1/4"
SKU #1021000-0032
1
$0.23 (0.23/ea)
100
$19.00 (0.19/ea)
1000
$170.00 (0.17/ea)
Subtotal: $0.00 /
Star Drive 6-Lobe Flat Head Self Driller Security Screws - #6 x 1-1/2"
SKU #1021000-0042
Star Drive 6-Lobe Flat Head Self Driller Security Screws - #6 x 1-1/2"
SKU #1021000-0042
1
$0.22 (0.22/ea)
100
$18.00 (0.18/ea)
1000
$160.00 (0.16/ea)
Subtotal: $0.00 /



FREQUENTLY USED WITH

1
$7.38 (7.38/ea)
10
$65.90 (6.59/ea)
50
$272.00 (5.44/ea)
Subtotal: $0.00 /
1
$1.60 (1.6/ea)
100
$120.00 (1.2/ea)
1000
$1,120.00 (1.12/ea)
Subtotal: $0.00 /
1
$8.04 (8.04/ea)
Subtotal: $0.00 /

Product Specifications
Color
Silver
Corrosion Resistant
Yes
Diameter
#6
Drive Style
Star (with Pin)
Grade
410
Head Style
Flat
Material
Stainless Steel
Point Type
TEK 3
Product Type
Tamper Proof Self Drilling Screws
System of Measurement (Unit)
Inch
TEK Self Drilling Point
TEK 3
Thread Diameter Major
(#6) 0.139"
Thread Diameter Minor
(#6) 0.104"
Thread Direction
Right Hand
Thread Pitch (Count)
20 Per Inch
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
Torx TP Drive
T-10