#10-32 Spanner Oval Head Tamper Proof Machine Screw 18-8 Stainless Steel

#10-32 Spanner Security Oval Head Machine Screws

Diameter - Thread Pitch: #10-32


  • Spanner (snake eye) drive is considered an uncommon drive style making screws with this head type difficult to remove without the proper bit
  • Countersunk head with a raised domed top
  • Used to secure materials that may be tampered with
  • A machine screw is commonly identified by its small size
  • Ideal for freshwater moisture environments
  • Rust and corrosion resistant

#10-32 Spanner oval head security machine screws are available in grade 18-8 stainless steel.

Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size/SKU
Select Package Quantity Price
SubTotal
#10-32 x 1/2"
#10-32 x 1/2"
1 $0.77 (0.77/ea)
100 $52.00 (0.52/ea)
1000 $450.00 (0.45/ea)
Subtotal: $0.00 /
#10-32 x 5/8"
#10-32 x 5/8"
1 $0.81 (0.81/ea)
100 $55.00 (0.55/ea)
1000 $480.00 (0.48/ea)
Subtotal: $0.00 /
#10-32 x 3/4"
#10-32 x 3/4"
1 $0.85 (0.85/ea)
100 $57.00 (0.57/ea)
1000 $500.00 (0.5/ea)
Subtotal: $0.00 /
#10-32 x 1"
#10-32 x 1"
1 $0.91 (0.91/ea)
100 $61.00 (0.61/ea)
1000 $540.00 (0.54/ea)
Subtotal: $0.00 /
#10-32 x 1-1/4"
#10-32 x 1-1/4"
1 $1.05 (1.05/ea)
100 $70.00 (0.7/ea)
1000 $620.00 (0.62/ea)
Subtotal: $0.00 /
#10-32 x 1-1/2"
#10-32 x 1-1/2"
1 $1.13 (1.13/ea)
100 $75.00 (0.75/ea)
1000 $660.00 (0.66/ea)
Subtotal: $0.00 /
#10-32 x 2"
#10-32 x 2"
1 $1.29 (1.29/ea)
100 $86.00 (0.86/ea)
1000 $750.00 (0.75/ea)
Subtotal: $0.00 /

Frequently Used With

1 $0.07 (0.07/ea)
100 $3.00 (0.03/ea)
1000 $20.00 (0.02/ea)
Subtotal: $0.00
1 $0.07 (0.07/ea)
100 $3.00 (0.03/ea)
1000 $20.00 (0.02/ea)
Subtotal: $0.00
1 $0.08 (0.08/ea)
100 $5.00 (0.05/ea)
1000 $40.00 (0.04/ea)
Subtotal: $0.00
1 $0.11 (0.11/ea)
100 $7.00 (0.07/ea)
1000 $60.00 (0.06/ea)
Subtotal: $0.00
1 $1.92 (1.92/ea)
100 $160.00 (1.6/ea)
1000 $1,560.00 (1.56/ea)
Subtotal: $0.00

Product Specifications
Corrosion Resistant
Yes
Drive Style
Spanner
Grade
18-8
Head Diameter
Max 0.385 - Min 0.340
Head Style
Oval
Material
Stainless Steel
Overall Head Height
Max 0.176 - Min 0.148
Product Type
Spanner Oval Head Machine Screws are Fully Threaded
Spanner Drive
#10
System of Measurement (Unit)
Inch
Thread Diameter
(#10) Max 0.1890 - Min 0.1818
Thread Direction
Right Hand
Thread Pitch (Count)
32 Per Inch
Thread Standard
UNF
Thread Type
Fine
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances