#10-24 Star Drive 6-Lobe Flat Head Machine Screw 18-8 Stainless Steel

#10-24 Stainless Steel Star Drive Flat Head Machine Screws

Diameter - Thread Pitch: #10-24


  • Countersunk flat head with a star drive (6 lobe) drive
  • A machine screw is commonly identified by its small size
  • Used with nuts or in a pre-drilled hole
  • Designed to prevent stripping during proper installation
  • Higher torque can be used with this drive style
  • 18-8 stainless steel is the fastener industry standard
  • Suitable for freshwater environments

#10-24 Star drive flat head machine screws are made of 18-8 stainless steel.

Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size
Select Package Quantity
SubTotal
Star Drive 6-Lobe Flat Head Machine Screw 18-8SS - #10-24 x 1/2"
SKU #1079-066-0002
Star Drive 6-Lobe Flat Head Machine Screw 18-8SS - #10-24 x 1/2"
SKU #1079-066-0002
1
NA
25
$7.50 (0.3/ea)
100
$18.00 (0.18/ea)
1000
$160.00 (0.16/ea)
Subtotal: $0.00 /
Star Drive 6-Lobe Flat Head Machine Screw 18-8SS - #10-24 x 3/4"
SKU #1079-066-0012
Star Drive 6-Lobe Flat Head Machine Screw 18-8SS - #10-24 x 3/4"
SKU #1079-066-0012
1
NA
25
$8.25 (0.33/ea)
100
$19.00 (0.19/ea)
1000
$170.00 (0.17/ea)
Subtotal: $0.00 /
Star Drive 6-Lobe Flat Head Machine Screw 18-8SS - #10-24 x 1"
SKU #1079-066-0022
Star Drive 6-Lobe Flat Head Machine Screw 18-8SS - #10-24 x 1"
SKU #1079-066-0022
1
NA
25
$11.00 (0.44/ea)
100
$21.00 (0.21/ea)
1000
$190.00 (0.19/ea)
Subtotal: $0.00 /

Frequently Used With

1
$2.01 (2.01/ea)
10
$18.50 (1.85/ea)
25
$45.75 (1.83/ea)
50
$89.50 (1.79/ea)
Subtotal: $0.00 /
1
NA
25
$1.75 (0.07/ea)
100
$5.00 (0.05/ea)
1000
$40.00 (0.04/ea)
Subtotal: $0.00 /
1
NA
25
$1.50 (0.06/ea)
100
$3.00 (0.03/ea)
1000
$20.00 (0.02/ea)
Subtotal: $0.00 /

Product Specifications
Corrosion Resistant
Yes
Drive Style
Star
Grade
18-8
Head Diameter
Max 0.385 - Min 0.340
Head Style
Flat
Material
Stainless Steel
Overall Head Height
Max 0.116 - Min 0.098 (From Bottom of Undercut to Top of Head)
Product Type
Torx 6 Lobe Flat Head Machine Screws
System of Measurement (Unit)
Inch
Thread Diameter
(#10) Max 0.1890 - Min 0.1818
Thread Direction
Right Hand
Thread Pitch (Count)
24 Per Inch
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
Torx Drive
T25