Tamper Proof Shear Nuts 304 Stainless Steel

Stainless Steel Breakaway Nuts

Tamper Proof Shear Nuts in 304 Stainless Steel


  • Also referred to as a Break Away Nut or Shear Nut
  • Tapered outer diameter
  • Makes gripping the nut very difficult after installed
  • Installed using a standard wrench or socket
  • Once maximum torque is reached, the hex portion snaps off the installed portion
  • Leaves only a coned nut behind
  • Corrosion resistant 304 stainless steel

304 Stainless Steel Break-Away Nut Specifications

Nut Sizes Hex Drive Torque Guide Bottom Diameter (Max) Pre-Installed Height Nut Height
1/4"-20 9/16" 67-98 inch/lbs 0.5625" 0.470" 0.22"
5/16"-18 5/8" 106-133 inch/lbs 0.6250" 0.500" 0.22"
3/8"-16 3/4" 230-248 inch/lbs 0.7500" 0.580" 0.25"
1/2"-13 1" 372-407 inch/lbs 1.0000" 0.750" 0.35"
5/8"-11 1-1/8" 460-513 inch/lbs 1.1250" 0.800" 0.37"
Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size
Select Package Quantity
SubTotal
Shear Nuts 304 Stainless Steel - 1/4"-20
SKU #6208-022-0002
Shear Nuts 304 Stainless Steel - 1/4"-20
SKU #6208-022-0002
1
$1.64 (1.64/ea)
100
$144.00 (1.44/ea)
1000
$1,240.00 (1.24/ea)
Subtotal: $0.00 /
Shear Nuts 304 Stainless Steel - 5/16"-18
SKU #6208-022-0012
Shear Nuts 304 Stainless Steel - 5/16"-18
SKU #6208-022-0012
1
$2.96 (2.96/ea)
100
$276.00 (2.76/ea)
1000
$2,500.00 (2.5/ea)
Subtotal: $0.00 /
Shear Nuts 304 Stainless Steel - 3/8"-16
SKU #6208-022-0022
Shear Nuts 304 Stainless Steel - 3/8"-16
SKU #6208-022-0022
1
$3.27 (3.27/ea)
100
$290.00 (2.9/ea)
1000
$2,700.00 (2.7/ea)
Subtotal: $0.00 /
Shear Nuts 304 Stainless Steel - 1/2"-13
SKU #6208-022-0032
Shear Nuts 304 Stainless Steel - 1/2"-13
SKU #6208-022-0032
1
$6.40 (6.4/ea)
100
$600.00 (6/ea)
1000
$5,000.00 (5/ea)
Subtotal: $0.00 /
Shear Nuts 304 Stainless Steel - 5/8"-11
SKU #6208-022-0042
Shear Nuts 304 Stainless Steel - 5/8"-11
SKU #6208-022-0042
1
$9.04 (9.04/ea)
100
$804.00 (8.04/ea)
1000
$7,040.00 (7.04/ea)
Subtotal: $0.00 /

Product Specifications
Color
Silver
Corrosion Resistant
Yes
Drive Style
External Hex
Elongation
% in 2in - 40
Grade
304
Hardness
Max. Brinell - 201
Material
Stainless Steel
Product Type
Breakaway Nut
System of Measurement (Unit)
Inch
Tensile PSI
75,000
Thread Direction
Right Hand
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
Yield PSI
30,000