Sheet Metal Screws, Square Drive Pan Head, Stainless Steel 18-8, #14

Sheet Metal Screws, Square Drive Pan Head, Stainless Steel 18-8, #14

Diameter - Thread Pitch: #14-10


  • #14-10
  • Easily cut into soft materials
  • Fully threaded
  • Threads cut into material
  • Great for attaching metal equipment to wood
  • Strong retention in wood
  • Also known as Self Piercing Screws or Self Tapping Screws
  • Pan head - rounded top with an undercut (flat bottom) head
  • Square drive to prevent stripping at higher torque
  • Sizes listed below as: Diameter - Length
  • An 18-8 stainless steel square drive pan head sheet metal screw is corrosion and rust resistant
  • Great for fresh water moisture environments

Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size/SKU
Select Package Quantity Price
SubTotal
#14-10 x 3/4"
#14-10 x 3/4"
1 $0.38 (0.38/ea)
100 $27.00 (0.27/ea)
1000 $240.00 (0.24/ea)
Subtotal: $0.00 /
#14-10 x 1"
#14-10 x 1"
1 $0.42 (0.42/ea)
100 $29.00 (0.29/ea)
1000 $250.00 (0.25/ea)
Subtotal: $0.00 /
#14-10 x 1-1/4"
#14-10 x 1-1/4"
1 $0.45 (0.45/ea)
100 $34.00 (0.34/ea)
1000 $300.00 (0.3/ea)
Subtotal: $0.00 /
#14-10 x 1-1/2"
#14-10 x 1-1/2"
1 $0.58 (0.58/ea)
100 $39.00 (0.39/ea)
1000 $350.00 (0.35/ea)
Subtotal: $0.00 /
#14-10 x 1-3/4"
#14-10 x 1-3/4"
1 $0.63 (0.63/ea)
100 $42.00 (0.42/ea)
1000 $370.00 (0.37/ea)
Subtotal: $0.00 /
#14-10 x 2"
#14-10 x 2"
1 $0.71 (0.71/ea)
100 $48.00 (0.48/ea)
1000 $420.00 (0.42/ea)
Subtotal: $0.00 /
#14-10 x 2-1/2"
#14-10 x 2-1/2"
1 $0.98 (0.98/ea)
100 $62.00 (0.62/ea)
1000 $540.00 (0.54/ea)
Subtotal: $0.00 /

Frequently Used With

1 $1.05 (1.05/ea)
10 $8.60 (0.86/ea)
50 $38.50 (0.77/ea)
Subtotal: $0.00
1 $4.84 (4.84/ea)
10 $43.20 (4.32/ea)
50 $194.50 (3.89/ea)
Subtotal: $0.00
1 $0.08 (0.08/ea)
100 $4.00 (0.04/ea)
1000 $30.00 (0.03/ea)
Subtotal: $0.00
1 $0.09 (0.09/ea)
100 $3.00 (0.03/ea)
1000 $20.00 (0.02/ea)
Subtotal: $0.00

Product Specifications
ANSI
ANSI B18.6.4
Color
Silver
Corrosion Resistant
Yes
Diameter
#14
Drive Style
Internal Square
Elongation
30%
Grade
18-8
Hardness
100 Rockwell B
Head Diameter
Max 0.492 - Min 0.473
Head Height Max
0.144
Head Style
Pan
Material
Stainless Steel
Overall Head Height
Max 0.144 - Min 0.130
Point Type
A
Product Type
Sheet Metal Screws
Reduction
40%
Square Drive
#3
Standards Met
ANSI B18.6.4
System of Measurement (Unit)
Inch
Tensile PSI
100,000 - 125,000 PSI
Thread Diameter Major
(#14) 0.254" - 0.248"
Thread Diameter Minor
(#14) 0.185" - 0.178"
Thread Direction
Right Hand
Thread Pitch (Count)
10 Per Inch
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
Yield PSI
55,000 - 75,000 PSI