3/8"-16 Brass Slotted Round Head Machine Screws
Diameter - Thread Pitch: 3/8"-16
- Slotted drive style designed to be driven by a flat head or slotted screwdriver or bit
- ASME standards specific
- Used with a tapped hole or nut
- A machine screw is commonly identified by its small size
- Conducts electricity and heat
- Brass is an alloy made of copper and zinc
- Color can vary from dark to light based upon the zinc content
- Prized for its corrosion resistance but is a very soft metal
- Commonly used for:
- Pipes
- Weather Stripping
- Trim
- Radiators
- Musical Instruments
- Firearms
3/8"-16 Slotted round head machine screws are available in corrosion resistant brass.
NOTE: Color and sheen may vary
See Product Specifications
Select Package Quantity
Loading ...
Product Specifications
ANSI
B18.6.3
Color
Yellow
Color May Vary
Color and sheen may vary
Corrosion Resistant
Yes
Drive Style
Slotted
Elongation
10% - 25%
Hardness
40-75 Rockwell B
Head Diameter
Max 0.709 - Min 0.670
Head Style
Round
Material
Brass
Overall Head Height
Max 0.256 - Min 0.237 (From Bottom to Top of Head)
Product Type
Slotted Round Head Machine Screws
System of Measurement (Unit)
Inch
Tensile PSI
50,000 - 65,000 PSI
Thread Diameter
(3/8") Max 0.3737 - Min 0.3643
Thread Direction
Right Hand
Thread Pitch (Count)
16 Per Inch
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
Yield PSI
30,000 - 50,000 PSI
