5/16"-18 Slotted Indented Hex Washer Head Type F Thread Cutting Screw Zinc Plated

5/16"-18 Zinc Plated Steel Slotted Indented Hex Washer Head Thread Cutting Screws - Type F

Diameter - Thread Pitch: 5/16"-18


5/16"-18 Zinc plated thread cutting screws feature a thread cutting tip which makes threads in existing or pre-drilled holes.

Drill Bit Sizes for Thread Cutting Screws

  • Feature a machine screw style thread
  • Blunt tapered point with multi-cutting edges
  • Hexagonal head with a slotted drive and washer built into the head
  • Applied with a wrench of a slotted or flat screwdriver
  • Chip cavities
Zinc Plating adds a layer of corrosion resistance to plain alloy steel but is not recommended for extreme environments.


Sizes Listed As:
Diameter - Thread Pitch x Length from Underside of Head

Select Products Below
See Product Specifications
Size:
Qty
Size
Select Package Quantity
SubTotal
Loading ...
Product Specifications
Across Flats (Width)
1/2" (Max 0.500 - Min 0.489)
Color
Silver
Corrosion Resistant
Yes
Diameter
5/16"
Drive Style
Slotted/Hex
Finish
Zinc Plated
Head Style
Slotted Hex Washer
Material
Steel
Overall Head Height
Max 0.230 - Min 0.208
Point Type
F
Product Type
Thread Cutting Screws
System of Measurement (Unit)
Inch
Thread Diameter
(5/16") Max 0.3125 - Min 0.3026
Thread Direction
Right Hand
Thread Pitch (Count)
18 Per Inch
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
Washer OD
Max 0.676 - Min 0.624
Washer Thickness
Max 0.055 - Min 0.035
Wrench Size
1/2"