#6-32 Phillips Pan Head Machine Screw Zinc Plated Steel

#6-32 Zinc Plated Phillips Pan Head Machine Screws

Diameter - Thread Pitch: #6-32


  • Used mostly for metal applications
  • A machine screw is commonly identified by its small size
  • ASME Standards Specific
  • Zinc plated steel Phillips pan head machine screws adds a layer of corrosion resistance
  • Zinc plated steel has a light, shiny color and sometimes has a bright blue hue
  • Not suitable for extreme environmental use
  • Commonly used for:
    • Drawer Slides
    • Machinery

#6-32 Zinc Plated Phillips Pan Head Machine Screws are screws or bolts, typically found in smaller sizes, that hold machinery together.
REACH and RoHS Compliant

Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size
Select Package Quantity
SubTotal
Phillips Pan Head Machine Screw Zinc - #6-32 x 3/4"
SKU #8306-010-0002
Phillips Pan Head Machine Screw Zinc - #6-32 x 3/4"
SKU #8306-010-0002
1
$0.08 (0.08/ea)
100
$3.00 (0.03/ea)
1000
$20.00 (0.02/ea)
Subtotal: $0.00 /
Phillips Pan Head Machine Screw Zinc - #6-32 x 1"
SKU #8306-010-0012
Phillips Pan Head Machine Screw Zinc - #6-32 x 1"
SKU #8306-010-0012
1
$0.08 (0.08/ea)
100
$3.00 (0.03/ea)
1000
$20.00 (0.02/ea)
Subtotal: $0.00 /



FREQUENTLY USED WITH

1
$1.04 (1.04/ea)
10
$8.10 (0.81/ea)
50
$38.00 (0.76/ea)
Subtotal: $0.00 /
1
$1.06 (1.06/ea)
10
$10.00 (1/ea)
50
$48.00 (0.96/ea)
Subtotal: $0.00 /
1
$0.07 (0.07/ea)
100
$2.00 (0.02/ea)
1000
$10.00 (0.01/ea)
Subtotal: $0.00 /
1
$0.05 (0.05/ea)
100
$2.00 (0.02/ea)
1000
$10.00 (0.01/ea)
Subtotal: $0.00 /

Product Specifications
Color
Silver
Corrosion Resistant
Yes
Diameter
#6
Drive Style
Phillips
Finish
Zinc Plated
Head Diameter
Max 0.270 - Min 0.256
Head Height Max
0.082
Head Style
Pan
Material
Steel
Overall Head Height
Max 0.082 - Min 0.072
Phillips Drive
#2
Product Type
Machine Screws
System of Measurement (Unit)
Inch
Thread Direction
Right Hand
Thread Pitch (Count)
32 Per Inch
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances