Print this page
M4 x .7 Phillips Oval Head Machine Screw

M4-0.70 Stainless Steel Metric Phillips Oval Head Machine Screws

Diameter - Thread Pitch: M4-0.70

  • DIN 7985 and ISO 7045 Standards specific
  • Used with nuts or driven into pre-drilled holes
  • A machine screw is commonly identified by its small size
  • 90 Degree countersunk head
  • A2 Stainless steel is the metric industry standard stainless steel
  • Designed for long lasting, exterior applications due to their corrosion resistance and durability

M4-0.70 Phillips drive oval head machine screws in A2 Stainless Steel.
Sizes listed as: Diameter - Thread Pitch x Length from Top of Head

Select Products Below See Product Specifications
NA = "Not Sold In Single Quantity"

Size
Select Package Quantity
SubTotal
Phillips Oval Head Machine Screw A2 SS - M4 x .7 x 16MM
SKU #1300-004-0002
Phillips Oval Head Machine Screw A2 SS - M4 x .7 x 16MM
SKU #1300-004-0002
1
 NA
25
 $4.00 (0.16/ea)
100
 $10.00 (0.1/ea)
1000
 $80.00 (0.08/ea)
Subtotal: $0.00 /

Frequently Used With

Phillips Power Bits - #2 - Length 2"
Phillips Power Bits - #2 - Length 2" 1050-500-0016
Phillips Power Bits - #2 - Length 2
1
 $1.04 (1.04/ea)
10
 $8.10 (0.81/ea)
25
 $19.50 (0.78/ea)
50
 $38.00 (0.76/ea)
Subtotal: $0.00 /
Flat Washers A2 SS - M4 (4.3M ID x 9.0M OD x 0.8M Thick)
Flat Washers A2 SS - M4 (4.3M ID x 9.0M OD x 0.8M Thick) 5620032
Flat Washers A2 SS - M4 (4.3M ID x 9.0M OD x 0.8M Thick)
1
 NA
25
 $1.50 (0.06/ea)
100
 $2.00 (0.02/ea)
1000
 $10.00 (0.01/ea)
Subtotal: $0.00 /
Finish Hex Nuts A2 SS - M4 x .7 (7.0 Flats x 2.9 Thick)
Finish Hex Nuts A2 SS - M4 x .7 (7.0 Flats x 2.9 Thick) 5560032
Finish Hex Nuts A2 SS - M4 x .7 (7.0 Flats x 2.9 Thick)
1
 NA
25
 $1.50 (0.06/ea)
100
 $3.00 (0.03/ea)
1000
 $20.00 (0.02/ea)
Subtotal: $0.00 /
Product Specifications
Color
Silver
Corrosion Resistant
Yes
Diameter
M4
Drive Style
Phillips
Grade
A2
Head Diameter
Max 8.40 - Min 8.04
Head Style
Oval
Material
Stainless Steel
Overall Head Height
Max 2.7�
Phillips Drive
#2
Product Type
Metric Machine Screws
System of Measurement (Unit)
Millimeter
Thread Direction
Right Hand
Thread Pitch (Count)
0.70 mm
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances

Your item has been added to your wish list.

Login

Please login to your customer account to create or access your wish list.

Forgot Password?

If you don't have an account click here to register.

Tell a friend about M4 x .7 Phillips Oval Head Machine Screw

Volume Pricing: Buy in volume, get a discount. The larger the pack, the lower the cost per piece. Visit the New Site Features Page for additional details.