Print this page
M3 x .5 Phillips Oval Head Machine Screw

M3-0.50 Stainless Steel Metric Phillips Oval Head Machine Screws

Diameter - Thread Pitch: M3-0.50

  • DIN 7985 and ISO 7045 Standards specific
  • Used with nuts or driven into pre-drilled holes
  • Mostly available in smaller sizes
  • A machine screw is commonly identified by its small size
  • 90 Degree countersunk head
  • A2 Stainless steel is the metric industry standard stainless steel
  • Designed for long lasting, exterior applications due to their corrosion resistance and durability

M3-0.50 Metric Phillips oval head machine screws in A2 Stainless Steel
Sizes listed as: Diameter - Thread Pitch x Length from Top of Head

Select Products Below See Product Specifications
NA = "Not Sold In Single Quantity"

Size
Select Package Quantity
SubTotal
Phillips Oval Head Machine Screw A2 SS - M3 x .5 x 8MM
SKU #1300-002-0002
Phillips Oval Head Machine Screw A2 SS - M3 x .5 x 8MM
SKU #1300-002-0002
1
 NA
25
 $1.25 (0.05/ea)
100
 $4.00 (0.04/ea)
1000
 $40.00 (0.04/ea)
Subtotal: $0.00 /



FREQUENTLY USED WITH

Phillips Power Bits - #1 - Length 2"
Phillips Power Bits - #1 - Length 2" 1050-500-0011
Phillips Power Bits - #1 - Length 2
1
 $1.04 (1.04/ea)
10
 $8.10 (0.81/ea)
25
 $19.50 (0.78/ea)
50
 $38.00 (0.76/ea)
Subtotal: $0.00 /
Finish Hex Nuts A2 SS - M3 x .5 (5.5 Flats x 2.15 Thick)
Finish Hex Nuts A2 SS - M3 x .5 (5.5 Flats x 2.15 Thick) 5560022
Finish Hex Nuts A2 SS - M3 x .5 (5.5 Flats x 2.15 Thick)
1
 NA
25
 $1.50 (0.06/ea)
100
 $3.00 (0.03/ea)
1000
 $20.00 (0.02/ea)
Subtotal: $0.00 /
Flat Washers A2 SS - M3 (3.2M ID x 7.0M OD x 0.5M Thick)
Flat Washers A2 SS - M3 (3.2M ID x 7.0M OD x 0.5M Thick) 5620022
Flat Washers A2 SS - M3 (3.2M ID x 7.0M OD x 0.5M Thick)
1
 NA
25
 $1.50 (0.06/ea)
100
 $3.00 (0.03/ea)
1000
 $20.00 (0.02/ea)
Subtotal: $0.00 /
Product Specifications
Color
Silver
Corrosion Resistant
Yes
Diameter
M3
Drive Style
Phillips
Grade
A2
Head Diameter
Max 5.5 - Min 5.2
Head Style
Oval
Material
Stainless Steel
Overall Head Height
Max 1.65
Phillips Drive
#1
Product Type
Metric Machine Screws
System of Measurement (Unit)
Millimeter
Thread Direction
Right Hand
Thread Pitch (Count)
0.50 mm
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances

Your item has been added to your wish list.

Login

Please login to your customer account to create or access your wish list.

Forgot Password?

If you don't have an account click here to register.

Tell a friend about M3 x .5 Phillips Oval Head Machine Screw

Volume Pricing: Buy in volume, get a discount. The larger the pack, the lower the cost per piece. Visit the New Site Features Page for additional details.